Active Member
|
[China]
Address: Block. 7, Zone C, Auto Parts industrial Park, Tianyuan Dist., Zhuzhou, Hunan, China (Mainland)
Contact name:Shirley Pan
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD. |
|
|
10% Cobalt Tungsten Carbide Metal Rod With One Central Hole For Making Carbide Tools
1. The ideal grade for every application
Our wide and innovative grade range satisfies the exacting demands
of the modern precision tooling industry. You can find the ideal
grade specific to all materials and applications.
2. Acknowledged quality
Our solid carbide rods are known for constantly providing maximum
quality. You can rely on our products as a basis for consistent
performance capacity of your tools.
3. Extensive Product dimension available in Stock
We offers you a wide range of dimensions, features and
capabilities.
4. Application
Our carbide rods are used for cutting aluminum alloy ,cast iron ,
stainless steel, Refractory alloy steel, nickel-based alloy ,
titanium alloy and nonferrous materials,For making drills , drills
, end mills &reamers , mold punches , core pins&hole
drilling tools
We can supply all kinds of dimensions solid carbide rods with
fine&sub micron grain size We manufactured and stocked many
dimensions of ground and unground carbide rod for your. We have a
large range of grade for your choice. We also can develop grade
based on your application.
Applications of material:
◆ Cast iron
◆ Stainless steel,Heat-resistant steel,Hardened steel(hardness<60HRC)
◆ Nickel-based, Titanium alloys
5. Various types
Solid rods
Single Central hole rods
Double parallel hole rods
Double helical 30° 40° hole rods
Chmafered rods
One side chamfered with weldon shank rods
Special customized rods
Material information
| Grade | YL10.2 (K25-K35) | |
| Co | % | 10 |
| WC | % | 90 |
| Density | g/cm3 | 14.5 |
| HV30 | kg/mm2 | 1600 |
| Hardness | HRA | 92.5-92.8 |
| Bending Strength | N/mm2 | >3800 |
| Porosity | A B C | A02B00C00 |
| WC Grain Size | μm | 0.6 |
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Various grade for your choice
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and Toughness, strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear resistance,Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and punching dies |
Production Advantages
1.Using over 99.95% high purity tungsten carbide powder, it has a
better strength and hardness combined with a longer service life
than the normal one.
2. Using ultrafine grain size of tungsten carbide powder to
produce,Hardness can reach to HRA93.6, Bending strength can reach
to 4000N/mm²
3.Tolerance can reach to ±0.001mm, straightness can reach to ±0.02mm
4. Customization is acceped
Part of our carbide rod Size List
| D | DTol | d | dTol | L | Tol |
| mm | mm | mm | mm | mm | mm |
| 2.5 | +0.20～0.50 | 0.3 | ±0.05 | 330 | 0～+5.0 |
| 4.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 6.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 8.0 | +0.20～0.50 | 1.5 | ±0.05 | 330 | 0～+5.0 |
| 10.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 12.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 14.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 16.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 18.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 20.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 22.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 24.0 | +0.40～0.80 | 4.0 | ±0.05 | 330 | 0～+5.0 |
| 26.0 | +0.40～0.80 | 5.0 | ±0.05 | 330 | 0～+5.0 |
| 15 | +0.40～0.80 | 6 | +-0.5 | 550max | 0～+5.0 |
| 22 | +0.40～0.80 | 10 | +-0.5 | 550 max | 0～+5.0 |
| 25 | +0.40～0.80 | 12 | +-0.5 | 500 | 0～+5.0 |
We manufactured and stocked unground and ground carbide rods for you. For more size information, please kindly email or call us.
Our packing and shipping
Based on Detail products, we use different Standard packing suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you request.
