Active Member
|
[China]
Address: Block. 7, Zone C, Auto Parts industrial Park, Tianyuan Dist., Zhuzhou, Hunan, China (Mainland)
Contact name:Shirley Pan
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD. |
|
|
power tools parts tungsten carbide tip for Industrial Parts
Product Features of tungsten carbide tip
ZhenFang tungsten carbide tip, made from 100% virgin raw materials. It can be used in wide application field. Jintai tungsten carbide tip, good red hardness,excellent wear-resistance, high elastic modulus and compressive strength. The chemical properties of our tungsten carbide tip is stable, also the impact toughness & dialatation coefficient is low. The heat-conducting property and electrical conductivity of tungsten carbide tip is close to iron or iron alloy.
It is a very good material to produce the parts to resist high temperature & corrosion, also it is widely used as wear parts and shielding parts. We provide you tungsten carbide tip which can enhance your productivity and save your cost.
| ISO | Jintai Grade | Density g/cm3 | Hardness No Less ThanHRA (HV) | TRS No Less Than (Mpa) | Applications recommended |
| K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese stell and hardening steel. |
| K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| K20 | YG8 | 14.6 | 89 | 1840 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| K05 | YG3 | 15 | 90.5 | 1300 | |
| M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
| M20 | YW2 | 13 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the maching of railway wheel hubs. |
| P10 | YT15 | 11.3 | 91 | 1300 | Suitable for the finihing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
| YT14 | 11.5 | 90.5 | 1400 | Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. | |
| P30 | YT5 | 13 | 89.5 | 1560 | Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
| P40 | YC40 | 12.9 | 91 | 2200 | Suitable for the heavy duty turning of steel and cast steel with a big steel with a big steel rate and also for face milling. |
Our Services
1> 24 hours technical support by Email or Calling.
2> Maintenance and technological support: Whole life.
3> Engineers available to service machinery overseas.
4> Free samples for testing
Company Information
1. Jintai company is a manufacture of tungsten carbide product
export carbide products more than 3000 units each year
2. Jintai tungsten carbide products are sold to more than 89 countries aroung the world
3. 17 years experience, and have good reputation
4. $1.4 million registered capital, 1000 square meters of new factory area
FAQ
Q: How can I choose the most suitable grade?
A: In order to recommend you the most suitable grade, please let us
know the following detailes:
1. What material that will be processed?
Q: What’s price
1. What’s size?
2. What’s tolerance?
3. How many?
