Active Member
|
[China]
Contact name:Yeva.Yang
Zhuzhou Gingte Cemented Carbide Co.,LTD |
|
|
Tungsten carbide Milling cutter YT5 produced according to the customer's use
Tungsten carbide non-standard products properties :
1. Designing for carbide
Designing for carbide requires special consideration in the area of selecting safety factors based on stress,toughness, impact and corrosion characteristics.components should be designed within these parameters for optimum performance.
2. The safety factor
The selection of a safety factor from calculations stresses. Fatigue and load factors may not be sufficient in all cases.Thus ,the selection of a safety factor relies on good-engineering practices,applications knowledge and ,when possible,computer modeling .Select a safety factor that is low enough to be practial ,but large enough to accomplish the job.
ADVANTAGES:
| Product Name | Tungsten carbide Milling cutter |
| Material | cemented carbide |
| Size | Non-standard products |
| Size Tolerance | Free tolerance or as customer's request |
| Color | As picture |
| Recommend Grade | YT5 etc |
| Grain Size | Medium and Fine Grain |
| Application | Produced according to the customer's use |
| Processing Treatment | Clean ground and polished or as customer request. |
| Product Features | Long life,good versatility,good wear resistance. |
| Certification | ISO9001 |
Grade Performances:
| Grade | ISO Grade | Density | Hardness | T.R.S | Application |
| g/cm3 | HRA | N/mm² | |||
| JT3 | K01 | 15.0 | 91.0 | 1400 | Qualified for fine turning and half fine turning when cast iron,nonferrous metal ,alloys as well as non alloy materials cutting consecutively,Also qualified for sand -blasting nozzles. |
| JT6 | K20 | 14.9 | 90.0 | 2150 | For the cast iron ,nonferrous metal, alloy and unalloyed materials, electric drill for geology use and steel drill ,also process hard wood ,original wood ,aluminum section section bar, brass rod. |
| JT8 | K30 | 14.7 | 89.5 | 2320 | For machine manufacture ,processing blades and wearing parts,rough machineing of cast iron , nonferrous metal ,nonmetal materials at low cutting speed ,also used for hard wood , graphite ,grass. |
| JT11 | K40 | 14.4 | 88.5 | 2420 | Forming or stamping dies for metal powders and nonmetal powders. |
| JT15 | K40 | 14.0 | 87.5 | 2500 | For punching, stamping,forging tools under large stress,fabricating drawing dies of steel tubes and rods under high compressibility ratio,Powder metallurgy mouldenpress mould core,Cut very hard rock formations. |
| JT20 | 13.5 | 85.5 | 2800 | High bending strength ,used for step dies and other stamping dies ,as for watch parts, battery jars ,small screw caps etc. |
Packing Process:
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-25 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
