Active Member
|
[China]
Address: No. 6 B2 Road, Zigong City, Sichuan Province
Contact name:Philippe
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
|
High Wear Resistance Customized Turning Tool Tungsten Carbide Inserts Cutter
Application
Cemented carbide cutting tool is made of cemented carbide. Cemented carbide is a kind of alloy material made of refractory metal hard compound and bonded metal by powder metallurgy process. Cemented carbide has a series of excellent properties, such as high hardness, wear resistance, good strength and toughness, heat resistance, corrosion resistance and so on, especially its high hardness and wear resistance, even at 500 ℃, it still has a high hardness at 1000 ℃.
Cemented carbide blade is mainly made of whole cemented carbide as
matrix, after many production processes. Cemented carbide, also
known as tungsten steel, is made of high quality tungsten carbide
cobalt powder by pressing and sintering. It has high hardness, high
strength, high wear resistance and high elastic modulus. It belongs
to powder metallurgy industry. Cemented carbide as the tooth of
modern industry, cemented carbide tool plays a basic role in
promoting the development of manufacturing industry.
Cemented carbide can be divided into common cemented carbide, fine
grain cemented carbide and subfine and ultra fine grain cemented carbide according to grain
size, and the newly developed double crystal cemented carbide.
According to the main chemical composition, it can be divided into
tungsten carbide based cemented carbide and titanium carbide base
cemented carbide. Tungsten carbide based cemented carbide includes
tungsten cobalt (YG), tungsten cobalt titanium (YT) and rare
carbide (YW). They have their own advantages and disadvantages. The
main composition of tungsten carbide (WC), Titanium carbide (Tic),
Niobium carbide (Nbc) is Co. Titanium carbide based cemented
carbide is a kind of cemented carbide with Tic as its main
component. Mo and Ni. are commonly used metal adhesive phases.
Cemented carbide has high hardness (86 × 93hra, equivalent to
69~81HRC), second only to diamond, good thermal hardness (up to 900
× 1000 ℃, keep 60HRC), high bending strength (Mpa5100), good impact
toughness and high corrosion resistance of chemical inertia and
other general alloy blades do not have the characteristics.
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | ||||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | ||||
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. | |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. | |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. | |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. | |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. | |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. | |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. | |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring piece. | |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. | |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. | |
Production Process
FAQ
Q1: Are you the real reliable factory or just a trader company?
A1: We are the REAL factory located in Zigong ,China, we currently have over than 80 employees.
Q2: There have many companies called they are 'factory', how can I identified the truth?
A2: tips1, Familiar with the processing equipment which are for produce to your required products, and visit their company as well as their processing equipment.
tips-2, Appoint one of your reliable friend who is in China to visit their factory.
tips-3, Check their Certs and proof of its authenticity, instead to only check the PS version superficially.
tips-4, Searching on the Satellite maps to check their location.
tips 5, In fact, almost every company can apply for the Certs, but, only the factory can get the patents (such as: invention patent, utility patent or design patent) for their product, and a small factory or a trading company havn't the R&D support to apply patents.
tip-6, Factory are always available to take the photos at any time during the production process.
Q3: Can you give warranty of your products?
A3: Yes, we 100% satisfaction guarantee on all items. we have the independent inspection Dep.with the complete advanced product quality instrumentation to carry out IQC, PQC & FOC, the detailed inspection pictures and report will be sent to you for confirmation before delivery.
In case there have quality problem, just pls kindly to provide the pictures to show the problem by email,
we will 100% responsible for our problems and to provide the replacements to you at our costs.
Q4: Can we get support if we have our own market position?
A4: Please inform us your detailed mind on your market demand, we will discuss and propose helpful suggestion for you, to find the best solution for you.
