Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
Tungsten Carbide Grinding Media, Tungsten Carbide Grinding Ball, Tungsten Carbide Milling Ball
Advantages of Tungsten Carbide Ball
1. Made by original raw material;
2. With good abrasive resistance;
3. After accurate grinding and polishing, the frictional factor of
surface is very low;
4. Wth strict tolerance extent control; tolerance not more than
0.001mm;
5. With high grinding precision; precision was kept between G10 and
G100;
6. The error of ball is not more than 0.3-0.5μm;
7. With high hardness and good wear resistance.
Our tungsten carbide grinding media(grinding ball/milling ball)
with good wear-resistance, excellent hardness and mechanical
characters.
It's widely used for grinding tungsten carbide powder, Cobalt
powder, Quartz sand, sand etc.
1. Substantially longer service life than traditional tools
2. Consistent working depth
3. Needs no adjustment due to wear
4. Optimum utilisation of machine power
5. Lower tool costs
Grade List
Cobalt Binder Grades | ||||
| ||||
Grade | Binder(wt%) | Density(g/cm3) | Hardness(HRA) | TRS(≥N/mm2) |
YG3 | 3 | 15.30 | 91.00 | 1180 |
YG6 | 6 | 15.10 | 92.00 | 1420 |
YG6X | 6 | 15.10 | 91.00 | 1600 |
YG8 | 8 | 14.90 | 90.00 | 1600 |
YG10 | 10 | 14.70 | 89.00 | 1900 |
YG10X | 10 | 14.70 | 89.50 | 2200 |
YG15 | 15 | 14.20 | 87.00 | 2100 |
YG20 | 20 | 13.70 | 85.50 | 2500 |
YG20C | 20 | 13.70 | 82.00 | 2200 |
YG30 | 30 | 12.80 | 82.00 |
|
Ball dimension (mm) | ||
D±1.27(mm) | ||
15.88 | ||
19.05 | ||
23.83 | ||
28.58 | ||
31.75 | ||
34.93 | ||
42.88 | ||
57.15 |
Model/Item | V11-106 | V11-125 | V11-150 | V11-175 | V11-200 | V11-225 | V11-250 | V11-375 |
Ball-D +0.020/-0.010 (+0.51/-0.25) | 15.88 (0.625in) | 19.05 (0.75in) | 23.83 (0.938in) | 28.58 (1.125in) | 31.75 (1.25in) | 34.93 (1.375in) | 42.88 (1.688in) | 57.15 (2.25in) |
Seat-ID ± 0.050 (± 1.27) | 11.68 (0.46in) | 13.97 (0.55in) | 17.02 (0.67in) | 20.96 (0.825in) | 24.38 (0.96in) | 26.92 (1.06in) | 33.27 (1.31in) | 43.18 (1.7in) |
Seat-OD +0.000/-0.005 (+0.00/-0.13) | 20.14 (0.793in) | 23.32 (0.918in) | 29.67 (1.168in) | 35.26 (1.388in) | 37.54 (1.478in) | 43.69 (1.72in) | 51.05 (2.01in) | 78.03 (3.072in) |
Seat-H +0.020/-0.010 (+0.51/-0.25) | 12.70 (0.500in) | 12.70 (0.500in) | 12.70 (0.500in) | 12.70 (0.500in) | 12.70 (0.500in) | 12.70 (0.500in) | 12.70 (0.500in) | 19.05 (0.750in) |
10600 | 12500 | 15000 | 17500 | 20000 | 22500 | 25000 | 37500 | ||
D (customized) | Inch | 0.625 | 0.725 | 0.938 | 1.125 | 1.250 | 1.375 | 1.688 | 2.250 |
mm | 15.88 | 19.05 | 23.83 | 28.58 | 31.75 | 34.93 | 42.88 | 57.15 | |
H -0.020/-0.010 (+0.51/0.25) | Inch | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 | 0.500 | 0.750 |
mm | 12.70 | 12.70 | 12.70 | 12.70 | 12.70 | 12.70 | 12.70 | 19.05 | |
FZ +0.000/-0.031 (+0.00/-0.78) | Inch | 0.767 | 0.892 | 1.11 | 1.331 | 1.421 | 1.631 | 1.921 | 2.950 |
mm | 19.48 | 22.66 | 28.22 | 33.81 | 36.09 | 41.43 | 48.79 | 74.93 | |
OD +0.000/-0.005 (-0.00/-0.13) | Inch | 0.793 | 0.918 | 1.168 | 1.388 | 1.478 | 1.720 | 2.010 | 3.072 |
mm | 20.14 | 23.32 | 29.67 | 35.26 | 37.54 | 43.69 | 51.05 | 78.03 | |
ID +/-0.050 (+/-1.27) | Inch | 0.460 | 0.550 | 0.670 | 0.825 | 0.960 | 1.060 | 1.310 | 1.700/1.800 |
mm | 11.68 | 13.97 | 17.02 | 20.96 | 24.38 | 26.92 | 33.27 | 43.18/47.75 |
Dimensional Symbol | V11-106 | V11-125 | V11-150 | V11-175 | V11-200 | V11-225 | V11-250 | V11-375 |
Ball-D +0.020/-0.010 (+0.51/-0.25) | 15.88 (0.625in) | 19.05 (0.75in) | 23.83 (0.938in) | 28.58 (1.125in) | 31.75 (1.25in) | 34.93 (1.375in) | 42.88 (1.688in) | 57.15 (2.25in) |
Seat-ID ± 0.050 ( ± 1.27) | 11.68 (0.46in) | 13.97 (0.55in) | 17.02 (0.67in) | 20.96 (0.825in) | 24.38 (0.96in) | 26.92 (1.06in) | 33.27 (1.31in) | 43.18 (1.7in) |
Seat-OD +0.000/-0.005 +0.00/-0.13 | 20.14 (0.793in) | 23.32 (0.918in) | 29.67 (1.168in) | 35.26 (1.388in) | 37.54 (1.478in) | 43.69 (1.72in) | 51.05 (2.01in) | 78.03 (3.072in) |
Seat-H +0.020/-0.010 (+0.51/-0.25) | 0.500 (12.70in) | 0.500 (12.70in) | 0.500 (12.70in) | 0.500 (12.70in) | 0.500 (12.70in) | 0.500 (12.70in) | 0.500 (12.70in) | 0.750 (19.05in) |
Seats sizes(mm) | ||
Outer diameter | Inner diameter | Height |
19.48 | 11.68 | 12.7 |
22.66 | 13.97 | 12.7 |
28.22 | 17.02 | 12.7 |
33.81 | 20.96 | 12.7 |
36.09 | 24.38 | 12.7 |
41.43 | 26.92 | 12.7 |
48.79 | 33.27 | 12.7 |
74.93 | 43.18 | 19.05 |
Type and specifications | |||||||
Dia. | Inch | 3/4 | 7/8 | 15/16 | 1 | 1 1/8 | 1 3/16 |
mm | 19.05 | 22.225 | 23.813 | 25.4 | 28.575 | 30.163 | |
Inch | 1 1/4 | 1 3/8 | 1 1/2 | 1 5/8 | 1 11/16 | 1 3/4 | |
mm | 31.75 | 34.925 | 38.1 | 41.275 | 42.863 | 44.45 | |
Inch | 2 | 1 1/4 | 2 1/2 | ||||
mm | 50 | 50.8 | 57.15 | 60 | 63.5 | ||
The surface finish, tolerance class and tolerances of dimensions have respectively reached the standards of the machine industry: G5, G10, G16, G40 and G100 G1000of JB/T 9145-199 |
Production Process
FAQ
Q1: Are you the real reliable factory or just a trader company?
A1: We are the REAL factory located in Zigong ,China, we currently
have over than 80 employees.
Q2: There have many companies called they are 'factory', how can I
identified the truth?
A2: tips1, Familiar with the processing equipment which are for
produce to your required products, and visit their company as well
as their processing equipment.
tips-2, Appoint one of your reliable friend who is in China to
visit their factory.
tips-3, Check their Certs and proof of its authenticity, instead to
only check the PS version superficially.
tips-4, Searching on the Satellite maps to check their location.
tips 5, In fact, almost every company can apply for the Certs, but,
only the factory can get the patents (such as: invention patent,
utility patent or design patent) for their product, and a small
factory or a trading company havn't the R&D support to apply
patents.
tip-6, Factory are always available to take the photos at any time
during the production process.
Q3: Can you give warranty of your products?
A3: Yes, we 100% satisfaction guarantee on all items. we have the
independent inspection Dep.with the complete advanced product
quality instrumentation to carry out IQC, PQC & FOC, the
detailed inspection pictures and report will be sent to you for
confirmation before delivery.
In case there have quality problem, just pls kindly to provide the
pictures to show the problem by email,
we will 100% responsible for our problems and to provide the
replacements to you at our costs.
Q4: Can we get support if we have our own market position?
A4: Please inform us your detailed mind on your market demand, we
will discuss and propose helpful suggestion for you, to find the
best solution for you.