|
[China]
Trade Verify
Address: Room 411, Building B, Smart Cube, No. 460, Jinshan Road, Hetang District, Zhuzhou City, Hunan Province
Contact name:Victor
Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
YG3 YG6 YG8 Tungsten Carbide Buttons Octagonal Column Inserts For Coaling / Milling
Type: Octagonal Column Inserts
Material and technology: Tungsten Carbide in blanks; HIP sintering.
Grade: YG3, etcs;
| Grade | ISO | Density | Hardness | T.R.S | Applications recommended |
| Code | g/cm3 | HRA | MPa | ||
| YG3 | K05 | 15.1 | 92 | 1400 | Suitable for finishing of cast iron and nonferrous metal. |
| YG6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals |
| YG6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG8 | K20 | 14.8 | 89.5 | 2200 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YW1 | M10 | 13.1 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
| YW2 | M20 | 13 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
| YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. |
| YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast steel. |
| YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
Application:
Tungsten carbide bits with octagonal tips are normally used for coring in softer rock formations, overburden drilling, and cleaning of drill holes.
Welcome your inquiry.
