Active Member
|
[China]
Address: No.18, Yinhu Development Zone, Dongxihu District Wuhan China
Contact name:Nichole Deng
Wuhan Qiaoxin Refrigeration Equipment CO., LTD |
|
|
316L Stainless Steel Tube Heat Exchanger
Water - Cooled Condenser
316L Stainless Steel Tube Heat Exchanger Water - Cooled
Condenser is suitable for water cooled unit,
water source heat pump, air cooled pump and air cooled heat pump unit.
The product is applying for refrigerants of R22, R134a, R407C and
R410A etc.
The referigerating medium is for tap water, underground water,
river water and sea water or brine, water
and glycol solution, sulfate solution, etc.
For heat exchange tube, copper pipe, copper nickel alloy tube,
aluminum brass tube, stainless steel tube,
etc. The shell raw material mainly are seamless steel tube,
stainless steel pipe.
1, Heat exchange tube: four main tube type.
(1) ∅ within 3/8 "thread copper coil, it is mainly used for" U
"type tube evaporator.
(2) ∅ within 1/2 "threaded straight copper tube, straight tube is
mainly used for dry-type evaporator.
(3) ∅ 1/2 "corrugated straight stainless steel tube, straight tube
is mainly used in food industry of dry
evaporator.
(4) ∅ 5/8 "inside outside screw wing efficient copper tube, it is
mainly used for air precooling industry dry
evaporator.
2, shell raw material:
There are two of the major materials:
(1) # 20 seamless steel tube, mainly used for all kinds of load -
more than 20 ℃ cold agent.
(2) 304/316 l stainless steel tube, it is mainly used for food and
low temperature (below 25 ℃, higher than
40 ℃) of the refrigerant, 316 l can also be used for cooling load
of the sulfate for industry.
3, interface:
Dry type spiral baffle plate evaporator, flooded evaporator, built-in oil separator condenser, sea water
condenser, stainless steel heat exchanger, oil cooler, oil separator, gas-liquid separator and liquid
accumulator.
CONDENSER SERIES DOUBLE CIRCUIT
CAPACITY: 50RT TO 200RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
| D | T1 | T | A | C | E | H1 | H2 | |||||
| QXC50D10A | 50 | 18.9 | 273 | 953 | 2364 | 90 | 360 | 150 | 350 | 240 | 265 | 38.5 |
| QXC60D10A | 60 | 22.68 | 273 | 953 | 2364 | 90 | 360 | 150 | 350 | 240 | 279 | 46 |
| QXC70D12A | 70 | 26.46 | 325 | 953 | 2377 | 90 | 406 | 180 | 350 | 240 | 359 | 53.5 |
| QXC80D12A | 80 | 30.24 | 325 | 953 | 2377 | 90 | 406 | 180 | 350 | 240 | 375 | 61 |
| QXC100D12A | 100 | 37.80 | 325 | 953 | 2377 | 90 | 406 | 180 | 350 | 240 | 409 | 76 |
| QXC120D12A | 120 | 45.36 | 325 | 1270 | 3011 | 120 | 406 | 180 | 350 | 240 | 481 | 91 |
| QXC140D14A | 140 | 52.92 | 355 | 1270 | 3018 | 120 | 440 | 200 | 350 | 240 | 553 | 106 |
| QXC160D16A | 160 | 60.48 | 426 | 1600 | 3656 | 120 | 510 | 260 | 310 | 310 | 723 | 120.6 |
| QXC200D16A | 200 | 75.60 | 426 | 1600 | 3656 | 120 | 510 | 260 | 310 | 310 | 777 | 150.8 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) |
| FPT(inner pipe thread) | Male flange | |||
| QXC50D10A | 3/8 | 1-3/8 | 7/8 | DN65 |
| QXC60D10A | 3/8 | 1-5/8 | 1-1/8 | DN65 |
| QXC70D12A | 3/8 | 1-5/8 | 1-1/8 | DN80 |
| QXC80D12A | 3/8 | 1-5/8 | 1-1/8 | DN80 |
| QXC100D12A | 3/8 | 2-1/8 | 1-3/8 | DN100 |
| QXC120D12A | 3/8 | 2-1/8 | 1-3/8 | DN100 |
| QXC140D14A | 3/8 | 2-1/8 | 1-3/8 | DN100 |
| QXC160D16A | 3/8 | 2-5/8 | 1-3/8 | DN125 |
| QXC200D16A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
CONDENSER SERIES DOUBLE CIRCUIT
CAPACITY: 220RT TO 426RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
| D | T1 | T | A | C | E | H1 | H2 | |||||
| QXC220D16A | 220 | 78.55 | 426 | 1430 | 3656 | 120 | 530 | 260 | 310 | 310 | 830 | 165.8 |
| QXC240D16A | 240 | 81.65 | 426 | 1430 | 3656 | 120 | 530 | 260 | 310 | 310 | 890 | 181 |
| QXC260D20A | 260 | 84.36 | 480 | 1600 | 3800 | 150 | 530 | 280 | 310 | 310 | 953 | 195.5 |
| QXC280D20A | 280 | 88.24 | 480 | 1600 | 3800 | 150 | 530 | 280 | 350 | 240 | 1016 | 211 |
| QXC320D20A | 320 | 95.21 | 480 | 1600 | 3800 | 180 | 600 | 300 | 350 | 240 | 1098 | 240.6 |
| QXC340D22A | 340 | 98.68 | 530 | 1750 | 4000 | 180 | 600 | 300 | 350 | 240 | 1162 | 256 |
| QXC380D22A | 380 | 106.53 | 530 | 1750 | 4000 | 200 | 650 | 300 | 400 | 320 | 1253 | 285.5 |
| QXC426D22A | 426 | 115.62 | 530 | 1900 | 4000 | 200 | 650 | 300 | 420 | 350 | 1325 | 320 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) |
| FPT(inner pipe thread) | Male flange | |||
| QXC220D16A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
| QXC240D16A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
| QXC260D20A | 3/8 | 2-5/8 | 1-5/8 | DN125 |
| QXC280D20A | 3/8 | 3-1/8 | 2-1/8 | DN150 |
| QXC320D20A | 3/8 | 3-1/8 | 2-1/8 | DN150 |
| QXC340D22A | 3/8 | 4-1/8 | 2-1/8 | DN150 |
| QXC380D22A | 3/8 | 4-1/8 | 2-1/8 | DN200 |
| QXC426D22A | 3/8 | 4-1/8 | 2-1/8 | DN250 |
STEAM TO WATER HEAT EXCHANGER
CAPACITY: 1000KW TO 4000KW
| Model | Capacity (KW) | Dimension (mm) | Weight (kg) | ||||||||
| D | T1 | T | A | C | E | F | H1 | H2 | |||
| QXSW60S10 | 1000 | 273 | 1600 | 2053 | 120 | 360 | 150 | 100 | 350 | 240 | 297 |
| QXSW70S12 | 1250 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 357 |
| QXSW80S12 | 1400 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 372 |
| QXSW90S12 | 1600 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 387 |
| QXSW100S12 | 1800 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 412 |
| QXSW120S14 | 2100 | 355 | 2032 | 2555 | 150 | 440 | 180 | 120 | 400 | 290 | 494 |
| QXSW140S14 | 2500 | 355 | 2500 | 3023 | 180 | 440 | 180 | 120 | 400 | 290 | 517 |
| QXSW180S16 | 3200 | 426 | 2500 | 2951 | 180 | 530 | 260 | 150 | 260 | 260 | 729 |
| QXSW220S16 | 4000 | 426 | 2500 | 2951 | 180 | 530 | 260 | 150 | 260 | 260 | 784 |
| Model | S1 | S2 | W | |||
| Specification | Connection type | Specification | Connection type | Specification | Connection type | |
| QXSW60S10 | DN100 | male flange | DN65 | male flange | DN80 | male flange |
| QXSW70S12 | DN100 | male flange | DN65 | male flange | DN80 | male flange |
| QXSW80S12 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW90S12 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW100S12 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW120S14 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW140S14 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW180S16 | DN150 | male flange | DN100 | male flange | DN125 | male flange |
| QXSW220S16 | DN150 | male flange | DN100 | male flange | DN125 | male flange |
U SHAPED TUBE DRY EVAPORATOR (DOUBLE CIRCUIT)
CAPACITY: 120KW TO 310KW
| Models | QXU120D8 | QXU135D8 | QXU155D8 | QXU185D10 | QXU220D10 | QXU270D | QXU310 | ||
Rated data Refrigerant R22 ti=12°C te=2°C tu=7°C Dts=5°C | Qn | KW | 120 | 135 | 155 | 185 | 220 | 270 | 310 |
Kcal/h (×103 ) | 103.2 | 116 | 133.3 | 159 | 189 | 232 | 267 | ||
| Wn | m3 /h | 20.6 | 23.2 | 26.7 | 31.8 | 37.8 | 46.4 | 53.3 | |
| Wm | m3 /h | 25 | 28 | 30 | 41 | 43 | 65 | 68 | |
| Dpn | bar | 0.41 | 0.44 | 0.37 | 0.36 | 0.43 | 0.42 | 0.43 |
| Models | QXU120D8 | QXU135D8 | QXU155D8 | QXU185D10 | QXU220D10 | QXU270 | QXU310 | |
| Dimension(mm) | A | 1815 | 2115 | 2315 | 2320 | 2320 | 2654 | 2654 |
| B | 219 | 219 | 219 | 219 | 273 | 273 | 273 | |
| C | 200 | 200 | 200 | 200 | 234 | 234 | 234 | |
| D | 1530 | 1830 | 2030 | 2000 | 2000 | 2280 | 2280 | |
| E | 240 | 240 | 240 | 300 | 300 | 300 | 300 | |
| Vent | S1 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Outlet | S2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Connection | W(DN) | 89 | 89 | 89 | 89 | 114 | 114 | 114 |
| D1(mm) | 22 | 22 | 22 | 22 | 35 | 35 | 35 | |
| D2(mm) | 42 | 42 | 42 | 42 | 54 | 54 | 54 | |
| P(kg) | 145 | 155 | 163 | 232 | 255 | 279 | 296 | |
Qn-rated refrigerating capacity Wn-cooling water flow Wm-maximum cooling water flow Dpn-pressure drop of recirculating cooling water Dts-overheat temperature | ||||||||
COMPANY IMAGE
COOPERATED CLENTS
