Guangzhou Sub-Group Auto Parts Co.,Ltd. |
|
Fan Blade 2035608 7077114 for Scania Freight Car Engine system Fan
The function of the engine cooling fan is to enhance the air velocity and flow through the diffuser to improve the heat dissipation effect of the radiator. The fan is an important component in the engine cooling system. Its performance not only directly affects the heat dissipation efficiency of the radiator, but also affects the normal use and reliability of the engine.
Many parts of a car need to dissipate heat during operation, so
there are many places inside the car that need to be installed with
fans, including clutch fans, electronically controlled fans, and
general cooling fans.
The fan is located between the radiator and the body, is installed
on the same shaft as the water pump, and is driven by a pulley on
the crankshaft. The fan and the pulley hub are connected by bolts,
and the engine crankshaft pulley directly or indirectly drives the
fan to rotate.
The tightness of each belt should be adjusted according to
regulations. The tightness of the fan belt is too loose, causing
the fan pulley speed to decrease, the heat dissipation of the water
tank is weakened, the diesel engine working temperature is
increased, and the generator output current is reduced or unstable,
but the tightness of the fan belt is not as large as possible. The
fan belt Too tight will cause excessive load on the bearing,
increased wear, and increased power consumption. At the same time,
it will also cause the water pump shaft to bend, the belt will
elongate and deform, and its life will be shortened. Therefore, the
fan belt should be kept tight and properly adjusted if necessary.
Part Name | Truck Engine Fan Blade |
Description | Engine cooling parts |
Applied Model | SCANIA |
Part No. | 2035608 7077114 |
Brand | ZIQUN |
Warranty | Six months |
Place of Origin | Guangzhou,CHINA |
Payment Term | MoneyGram, T/T, D/P, D/A, L/C |
MOQ | 10 PCS |
Packing | Carton,Wooden case |
Packing Size | Export cargo standard |
Delivery Time | 20 workdays after received payment |
Condition: | 100% New |
Port: | Guangzhou/Shenzhen/Ningbo/Shanghai |
Delivery Methods: | Express: DHL Fedex EMS UPS or by Air/ Sea |
Payment Methods: | Bank transfer, Money Gram, Paypal ali trade assurance |
Advantage | Brand new parts can be guaranteed; |
Image description
There are two blowing directions for the cooling fan of the engine: blowing and suction. Which blowing method to choose depends on the layout of the engine cooling system. The layout of the engine cooling system needs to be determined according to the space of the engine compartment and the chassis structure of the vehicle body.