4-IN-1 VAG TOOL KIT Whatsapp /wechat: +8613631686452 Email: Shirley@jiutech.com 4-in-1 vag tool kit can fulfill functions of vag dash com+can, vag
dash com,vag ecu tool,vag key login. 4-in-1 vag tool kit is a
powerful and newest diagnostic tool for vw audi cars!
EDC16 / EDC15 / ME7 via the OBD EEprom read and write (EDC15/ME7
completely KM EDC16 currently stand will be constantly
expanded.
VAG DASH CAN is a newly designed program of our house.
VAG vehicles that the new generation.These are now on the
diagnostic socket set.
From the Volkswagen Touran, new combi-tools installed,only via the
CAN-diagnosis can be addressed.
The VAG DASH CAN determines the LOGIN and allows an adjustment or
recovery of the KM-stand.
A special highlight is the Schlusselanlernungs function.
Pushing a button allows you to teach key and without waiting 5
minutes and without that all semi-key must be available.
In addition, some extra features, in everyday life workshop a
valuable aid.
This includes, inter alia, the diagnostic capability of each joint
in the vehicle CAN controllers.
Now you can order for these vehicles the error memory read and
delete.
A valuable extension of your spectrum.
Secure your market advantage, by selecting one of the first to of
this exceptional software.
VAG DASH COM
VAG DASH COM is the unique advanced diagnostic tool to read out the
internal memory of your Instrument cluster
You can display the login code, recalibrate the odometer and
rewrite the EEpromdata in case of changing an instrument.
VAG DASH COM covers up the models 1998-2004 such as:
Golf IV
Passat
Polo 6N
Eurovan T4
Eurovan T5
Skoda
Seat
Audi A3 / A2 / A6
Audi A4 till 2000
All those models with communication via K-line VAG ECU TOOL
The tool for the complete access to all EEpromdaten with VAG-engine
control units of type EDC15 and ME7.
Read and write access to the EEprom.
Reading the secret odometer (if stored in the engine control
unit)
Immo-off function, login display, VIN change - everything
about the diagnosis socket - not removing the ECU.
With the write function is motor control "cloning" - no need
to teach.
Indispensable for workshops, recovery or Chiptuning.
Functions of the program:
Serial EEprom read and save
EEprom checksum checking and correction
IMMO on / off
EEprom from a file and write (clone function)
Read / write access to the login
Read / write access to the chassis number
Read / write access to the Immobilizernummer
Kilometers Motronic in the read and write (if
available)
In the ME7 .** controllers can also perform the following
functions:
Offset channels
Mixture enrichment
Idling torque change
Lambda value
Idle speed change
Correct charge (only for Turbo engines)
Ignition timing change
Supports the following types of motor control of
BOSCH:
EDC15
EDC15VM
EDC15P
EDC15P + BOSCH ME7.5
BOSCH ME7.5.1
BOSCH ME7.1
BOSCH ME7.1.1
4.VAG KEY LOGIN
The tool used to determine the login code in many VAG-no
speedometer,Engine ECUs and Immobilizer box. The integrated
software make this the perfect tool for the key service Included
are the special OBD connection interface, USB cable and the
software on CD.
The following control and tachometer options are supported:
VDO speedometer VW / Audi 1998-2005 (with Seat / Skoda partly
until 2006)
Motometertachos VW 1998-2004 (Golf, Passat)
Magneti Marelli M73 tachometers 1998-2001 (eg, TT,
Beetle)
EDC15 VM 2000-2004 (eg T4, Golf4, Passat 3BG with distributor
injection pump)
EDC15 P + 2000-2004 (all PumpeDuse, Golf4, Passat, A4,
A6)
ME 7.5 (eg, 1.8T, TT, V5)
ME 7.1.1 (eg, R32, Audi V6)
Temic IMMO the boxes of the LT's to the Year 2005
Most models of the white boxes Audi 12polig 1994-1998
6 pin boxes VW 1994-1998 (only with key semiskilled readable)
|
