Polished Tile Aluminum Edge Trim , Triangle Tile Trim 10mm Height

Polished Aluminum Tile Trim King Edging Triangle Shape Silver Cover

Application
 
Triangle corner aluminum tile trim are aluminum profiles that deal with the right-angle edges of ceramic tiles or marble. The triangular aluminum profiles can protect the edges of tiles or strong stones from damage, and avoid or reduce damage caused by bumps.In the treatment of columns in many high-end decorations, wall tiles or marble are usually attached. In order to make the floor, wall and column more smooth and beautiful, we usually use triangle corner aluminum tile trim to decorate. The column is unstable after being pasted with marble, it is easy to fall off, and it is easy to collide and cause damage. At this time, we need triangular tile aluminum profile decorative strips to solve this problem. There are many other situations, we can all use aluminum edge trim for edge trimming.
 
 
Feature

The profile’s unique design combines specific angle positions and material wall thicknesses to transmit point loads into the substrate and surface covering, thus protecting the covering’s edges against damage. The joint spacer, which is integrated in profiles higher than 6 mm, establishes a defined joint cavity between the tile and the profile. The anchoring leg of this profile, in all material types, can be punched with a special radius perforation “R” so that the profile can be used to form curves.

Use
 

1. Select profiles according to tile thickness.

2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.

3. Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required.

4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.

6. Fill the joint completely with grout.

Specification