Pto Driven Wood Chipper With Six Inches Chipping Capacity For 260mm
Length Knife
The BX62R is a PTO wood chipper of top
quality engineering. Through its hydraulic feed is working
with this machine a delight. Subsequent pushing, pressing, etc.,
there is not in this model; do that the two large feed rollers
alone. The speed of the feed rollers can be varied continuously.
This is important in order to align the feed speed on the diameter
of the Schredderguts. Smaller diameters can be recovered faster
than larger diameter. If the collection nevertheless once block may
be set to the reverse mode on the large bracket on the hopper of
the catchment. In addition, the feeder can also be disabled on this
clip.
The BX62R, which has a bilateral suspension of the feed rollers,
and a reinforced feed hopper.
The wood chipper is supplied complete with PTO. In the PTO is on
one side of a shear pin fitted, which serves as a predetermined
breaking point for safety reasons in blocking or overloading. So
you can easily use larger tractors with more than 100 hp. You
should have at least a motor power of 30 hp. The PTO speed must be
540 - 1000 rpm / min. amount.
The hopper has a top opening of 63.5 x 63.5 cm; at the bottom of
the opening has a dimension of 16.5 x 30.5 cm. Maximum, a diameter
of 16.5 cm are shredded. Many competitors give the maximum
Schreddergutdurchmesser equal to the dimensions of the lower filler
opening to . Softer woods can be shredded with diameters of up to
25 cm, if necessary; and such diameter are processed into firewood
in the rule and not chopped.
The processing of the BX62R is very solid; the material
thickness of the sheets employed are in the load bearing portion 10
and 12 mm, in the hoppers, and to non-load-bearing elements 4 and 6
mm.
For transport, the hopper can be easily folded up and secured with
a cotter pin. To facilitate the folding features of the Chopper 2
shock absorbers.
The machine has a very easy to maintain; so you can open with the
removal of just one screw the complete flywheel cover and has
access to the 4 cutting blades. These cutters have blades on both
sides, so they can be easily rotated when needed. The flywheel has
a weight of 95 kg and has put on wings, which produce the very
strong train by which ultimately the shredded material is blown out
through the discharge hopper. By this very strong draft clogging of
the shredder plant is almost impossible.
The discharge hopper has a height of 220 cm (plus. Raising the
lower arm) and can be rotated 360 degrees. On request we can
provide in addition a discharge hopper extension of 50 cm. Thus the
shredded can easily fill on tractor trailers or directly in big
bags. The ejection angle can also be changed. The BX62R flings
the shredded up to 10 meters! Color as your request.
The shredder is designed for 3-point hitch and can be used from
Kat. I..
