25 - 45HP 3 Point Chipper Shredder , 3 Pt Hitch Chipper Smooth Performance

3 Point Wood Chipper With 360 Degrees Discharge Hood Rotation For 95kg Flywheel

The Fred WC-8M is best used with a tractor engine power of 25 to 45HP. The advanced shaft driven system pulls the wood into the chipper by two rollers installed in the input section of the chipper. There are two rotory knifes mounted on the 95kg flywheel plus a stationary knife shredding wood up to 15cm in diameter into 1 to 4cm pieces.

We are the only factory in this price and product range to offer fully balanced flywheel discs, to ensure a smooth performance. The discharge hood can be turned by 360° with an adjustable throwing angle to easily fill material onto trailers, containers and big bags. The Fred WC - 8M capacity is up to 7 m³/h depending on the type of wood.

The WC - 8M does not need any hydraulic system and yet offering the same professional performance than expensive hydraulic shredders. A special feature of this chipper is, that it is driven by a 5 belt system with a gear ratio of 2:1, so that the blade flywheel turns with twice the speed than the 540rpm PTO shaft. You will get much smaller shredded wood pieces than with other chippers.

The PTO shaft driven roller is pulling the wood into the shredder. This makes work fast and easy.

The Cat I 3-point hitch includes additional Cat II bushings, so that you can also connect to larger tractors without any problem.

The shredded wood material is thrown out of the output funnel by an enormous air-suction, generated by the winglets mounted to the fast turning flywheel disc. Once shredding difficult material additional ventilation holes can be opened to further increase the air flow.