|
[China]
Trade Verify
Address: NO.676 Liang Qing Road binhui District, Wuxi City, Jiangsu PR, China.
Contact name:Grealish
Jiangsu TISCO TPCO Metal Products Co.,Ltd. |
|
Verified Suppliers
|
|
|
Anti Finger Chromate Passivated Zinc Aluminum Coated Steel Roll
Will galvanized steel rust?
Galvanized steel takes a long time to rust, but it will eventually rust. This type is carbon steel that has been galvanized or coated with a thin layer of zinc. The zinc acts as a barrier preventing oxygen and water from reaching the steel, providing advanced corrosion protection.
| Thick | 0.12 ~6.0 mm |
| Width | 600-1500 mm |
| Zinc Coating | 30~275G/M2 |
| Coil ID | 508 / 610MM |
| Coil Weight | 3-5 Tons |
| Standard | ASTM-A653; JIS G3302; EN10147; EN10326etc |
| Payment Terms | T/T, LC,DP. |
| Regular Order | 25 tons or one container, for less quantity, to contact with us for details |
| Hardness | Soft hard(HRB60),medium hard(HRB60-85),full hard(HRB85-95) |
| Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
| Surface Treatment | Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass |
Different Surface:Small,Large,Zero.Select as per your requirement
| Content | |||
| Material: | SG550/SG280/SG350DX51D+Z | SGCC/ CS TYPE | |
| Finish | NBMinimized Spangle (M) | ||
| Surface Treatment | Chemically Passivated (C) | ||
| Oil | Not Oiled | ||
| Zinc | Z30--275 | ||
| Thickness tolerances | Normal thickness tolerances | 0.40 < thickness ≤ 0.60 | ± 0.060 |
| 0.60 < thickness ≤ 0.80 | ± 0.070 | ||
| 0.80 < thickness ≤ 1.00 | ± 0.080 | ||
| 1.00 < thickness ≤ 1.20 | |||
| Width tolerances | 1200 < width ≤ 1500 | 6 ~ 0 | |
Chemical composition
| Designation | Chemical composition % by mass max. | ||||||
| Steel grade | C | Si | Mn | P | S | TI | |
| Steel name | Symbols for the types of available coatings | ||||||
| DX51D | +Z | 0.18 | 0.5 | 1.2 | 0.12 | 0.045 | 0.3 |
FAQ
Q1: Are you from a factory or trade company?
A1: Henan Tiga Engineering Co.,Ltd is a factory with 15 years
export experiences.
Q2: What is the payment term?
A2: Normally 30% T/T as deposit and the balance upon the copy of
bill of lading. L/C is also acceptable.
Q3: What about the delivery time?
A3: Normally about 25 days after receiving the deposit.
Q4: What are the advantages of aluminum zinc steel coil compared
with galvanized steel coil?
A4: Aluminum zinc steel coil has higher anti-corrosion and stable
performance with longer service life.
Q5: Can you offer free samples?
A5: Yes, the samples are free, but you have to pay the delivery
cost.
Q6: What's the package method?
A6: All products have the standard export seaworthy package.
