750KV tangent double circuit overhead transmission tower Double-circuit transmission line refer to towers have two
circuits and hold the different conductors stacked atop one
another, this photo refer to our 750KV double circuit tower with
four split conductors. This type tower is widely used in Chinese
market, with height from 80 to 100 meters or according to client
requirements.
Since 2004, MEGATRO focus mainly international market and had
export many kind of transmission structures to overseas clients.
MEGATRO has been manufacturing lattice transmission tower &
tapered steel poles for lighting, traffic control, communication
and utility applications. MEGATRO pioneered the development of
transmission tower, telecom tower, substation, and other steel
structure and was also at the forefront in the design of
Transmission tower.
Today, with over 10 years of experience and our commitment to
excellence, MEGATRO remains an industry leader in the manufacture
and design of steel tubular & angular & monopole structures
for all Highway, Municipal, Custom, telecom, lighting and electric
Utility applications. MEGATRO has a complete staff of professional
engineering personnel trained in the PLS Pole program and three
different manufacturing processes for producing steel towers, poles
and other supports. We utilize the latest versions of PLS-CADD,
PLS-POLE, TOWER, AutoCAD and other CAD software. The structure
shall be designed according to load combinations given as per IEC
61936-1 and as illustrated below:
Normal loads
1 Dead weight load
2 Tension load
3 Erection load
4 wind load
Exceptional loads
1 Switching forces
2 short-circuit forces
3 Loss of conductor tension
4 Earthquake forces
MEGATRO is one of the few manufactures who assemble a face of 750KV
tangent double circuit compact transmission tower. This attention
to quality may not be the cheapest process but it does insure every
tower meets our high standards of quality. And it helps to reduce
on-site construction cost due to mismatched assemblies. After
fabrication all 750KV tangent double circuit overhead transmission
towers are delivered to the galvanizing facility to be Hot DIP
Galvanized. Towers are processed through the facility by Caustic
Cleaning, Pickling, and then Fluxing. These strict procedures
insure years of maintenance free towers. MEGATRO' 750KV tangent
double circuit overhead transmission tower systems can accommodate
a variety of cross-arm. MEGATRO also offers a wide variety of
accessories and mounts.
Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Minimum order: 1 ton
Fabrication standard: Chinese Standard or other standard which
client accepted
Steel grades
Tower legs: Chinese steel Q420B, which same to ASTM A572 GR60
Other webs, bracing and not stress plate and angle steel: Chinese
Q345B or Q235B, which same to ASTM A572 GR50 or ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to
GB/T1591-1994, similar to EN 10056-1/2
B) Hot dip galvanization in accordance with GB/T 13912-2002, which
similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or
CWB standard
If any special requirement, we can design and discuss with client.