Home Companies Seelong Intelligent Technology(Luoyang)Co.,Ltd

Seelong Intelligent Technology Customized Sshh15-25000/50000 The Turbojet Engine Test Bench for Aircraft Engine

Seelong Intelligent Technology(Luoyang)Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: NO 18 YANGUANG ROAD HIGH TECH DEVELOPMENT ZONE, LUOYANG AREA OF CHINA (HENAN) PILOT FREE TRADE ZONE

Contact name:Vicky Qi

Inquir Now

Seelong Intelligent Technology(Luoyang)Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Seelong Intelligent Technology Customized Sshh15-25000/50000 The Turbojet Engine Test Bench for Aircraft Engine

Country/Region china
City & Province luoyang henan
Categories Analyzers
InquireNow

Product Details

Product description

 

The turbojet engine installation testing platform is used for turbojet engine thrust testing; The testing platform mainly consists of a low resistance slide, an engine mounting bracket, and a thrust measurement device.

1. Low resistance sliding table:
The sliding platform is divided into a base and a sliding platform, and a low friction coefficient linear bearing slide rail is installed between the base and the sliding platform; The base can directly dock with the tablet; The plane between the base and the sliding platform is machined to ensure that the flatness of each plane is not less than 0.02mm.
The linear bearing slide rail installed at the bottom of the sliding platform ensures relative parallelism during installation, and the parallelism of the slide rail is ensured to be ≤ 0.02mm through mechanical processing and positioning.

2. Thrust measurement device:
The thrust measurement device mainly consists of German HBM high-precision thrust measurement sensors and connectors, with sensor accuracy not lower than C3 level. The measuring device is directly connected to the sliding platform in a straight line, accurately measuring the thrust/tension of the platform as it tends to move; The platform is equipped with 2 sets of thrust measurement devices, installed at both ends of the bottom of the platform; One set is used for measurement, and the other set is used for calibration measurement.

3. Engine mounting bracket:
The installation bracket is made of high-quality aluminum alloy processed as a whole, ensuring its overall stiffness and strength; One end of the bracket is fixed on the sliding platform, and the other end is connected to the engine. An adapter fixture is installed on the bracket, and when users replace the engine, they only need to replace the adapter fixture to meet the docking and testing needs of different engines.

 

Technical specification

 

 

Range of thrust testing0-200Kgf
Overall testing accuracy±0.2%FS
Bearing120KG
Dimension500*500mm
Internal volume1.4m³
Inside dimensionAbout 1000 ×φ 550mm (length × Diameter)
External dimension1275mmx φ 700mm (length × Diameter)
Temperature resistance-50ºC~+350ºC
Pressure resistance10kPa~250kPa
Temperature measurement range0-800ºC
Temperature measurement accuracy±2.0ºC
Pressure measuring range0-120Kpa

 

 

Hot Products

Product description The turbojet engine installation testing platform is used for turbojet engine ...
Product description The new energy engine test bench is mainly used for performance, life testing, ...
SSCD15-1000/4500 15Kw Diesel Engine Performance Dynamometer Test Bench Product introduction The ...
SSCG200-3000/8000 200Kw Gas Engine Performance Dyno Test Bench Product introduction SSCG200-3000...
Product description This dynamometer is designed to complete the motor and control system performanc...
Product description This dynamometer is designed to complete the motor and control system performanc...