Introduction: 1. Suitable for laminating of cardboard and corrugated cardboard
in 150-600 g/m2 . 2. The vacuum suction-type feeding system can
lead the paper accurately into the machine; cycle stacking planes
in a state of non-stop the next batch of paper stack well, so that
more efficient. 3. Using suction automatic feeding of bottom sheet,
according to the main machine operating speed, continuous automatic
tracking. 4. The machine operation is stable, surface paper with
corrugated paper joint very accurate. The corrugated paper never
pull ahead, surface paper's location is easy adjust. 5. Machine
uses touch-screen/PLC/servo motor control system, double frequency
control type , the circuit system is stable, and can automatically
display the failure alarm. 6. Automatic gluing, and the glue can be
used circulatory, avoid glue waste. 7. Measure roller line-speed
design scientifically, avoid glue fly out when the speed is high.
8. Pressure rollers adopt unilateral adjustment, convenient and
fast. 9. Cleaning type : bottom roller is extruded by rubber roller
to clean the bottom laminating pressure roller, ensure the cleaner
on the reverse of the bottom paper . Make glue etc. foreign matter
after washing direct subside in tank. At the same time , adopting
the gear and chain to control the lifting of tank, can take out the
tank easily and convenient to wash . 10. The pressure conveyor
adopt floating movable structure , total length 5m , equipped with
28 paper pressing rollers , make the cardboard uniform bearing
strength in pressing process. 11. Counter designs scientifically,
easy recording the amount you have been worked. 12. Small pressure
table (optional) . length 2.5m , big pressure table length 5m.