Active Member
|
[China]
Address: No.208, Lvdi Road ,Baihe Town, Qingpu District, Shanghai
Contact name: Tobo Pipeline Equipment (Shanghai) Co., Ltd.
Tobo Pipeline Equipment (Shanghai) Co., Ltd. |
|
|
| Product Name: | High Precision RA Copper Foil | Application: | Two Layer FCCL |
|---|---|---|---|
| Width Range: | Up To 600mm | Shape: | Coil |
| Material: | America Copper Ingot | Normal Weight: | About 50kg Per Roll |
Mechanical Properties Sheet:
| Quality Items | General Technical Terms | |||||
| 1/3oz | 1/2oz | 1oz | 2oz | 3oz | ||
Surface Roughness (µm) | Matte Surface Rz | ≤6 | ≤7 | ≤10 | ≤12 | ≤5.1 |
| Peel Strength (kg/cm) | ≥1.1 | ≥1.2 | ≥1.8 | ≥2.2 | ≥1.0 | |
| Leakage Points (points/m2) | ≤5 | No | ||||
| High Temperature Anti-Oxidization Performance(180℃/h) | No Oxidization | |||||
Width Tolerance (mm) | Roll | (+2.0,0) | ||||
| Piece | (+2.0,-2.0) | |||||
| Test Standard | IPC-4562 | |||||
Features:
The material has higher extensibility, and has a high bending resistance and no crack.
Performances:
| Item | Unit | Parameters | |||||
| 12μm | 18μm | 25μm | 35μm | 70μm | |||
| Mass per unit(±5%) | g/m² | 105 | 160 | 300 | 400 | 445 | |
| Cu+Ag | % | ≥99.99 | |||||
| Temper | H | O,H | O,H | O,H | O,H | ||
| Surface roughness | Ra | μm | 0.13 | 0.12 | 0.1 | 0.08 | 0.08 |
| Rz | μm | 1.3 | 1.0 | 0.8 | 0.74 | 0.76 | |
| Tensile strength | Normal Temp /23℃ | N/mm² | ≥430 | ≥450 | ≥450 | ≥450 | ≥450 |
| High Temp /220℃ | N/mm² | ≥140 | ≥150 | ≥170 | ≥210 | ≥220 | |
| Elongation | Normal Temp /23℃ | % | ≥1.5 | ≥3.0 | ≥4.0 | ≥4.2 | ≥4.5 |
| High Temp /220℃ | % | ≥8 | ≥10 | ≥18 | ≥28 | ≥30 | |
| Fatigue Resistance (annealed) | % | 65 | 65 | 65 | 65 | 65 | |
| Maximum resistivity | Ωmm2/m | 0.0181 | |||||
| Electrical conductivity | % | ≥98.3% | |||||
| Film and adhesive layers | Instant Temp. 300℃/10s | Film and adhesive paste after transient temperature without blistering delamination. | |||||
| Anti oxidation | H.T.(200℃) | Minute | Won’t Change the Color within 60 minutes | ||||
| Pinhole test results | piece/ m² | Pinhole area more than 0.5 mm²,0.005 piece/ m² | |||||
