Active Member
|
[China]
Address: No.208, Lvdi Road ,Baihe Town, Qingpu District, Shanghai
Contact name: Tobo Pipeline Equipment (Shanghai) Co., Ltd.
Tobo Pipeline Equipment (Shanghai) Co., Ltd. |
|
|
| Brand Name: | TOBO |
| Model Number: | S31803/S31500/S32750 |
| Certification: | SGS/BV/ABS/LR/TUV/DNV/BIS/API/PED |
| Place of Origin: | China |
| Product Name | S32750 Duplex Stainless Steel Pipe ASME A789 A790 A450 A530 For Industry | Product Type | Duplex Stainless Steel Pipe |
| OD | 6MM---710MM | Thickness | 2.5mm---50mm |
| Material Grrade | S32101,S32205,S31803,S32304,S32750, S32760 | Type | ASME A789 A790 A450 A530 |
| Standard | ASTM A790/A789 PICKLED AND ANEANLED | Standard | Duplex Stainless Steel Pipe |
| Application | Petroleum/Power/Chemical/Construction/Gas/Metallurgy/Shipbuilding etc | ||
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 3,0000pcs per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | PLY-WOODEN CASE OR PALLET |
Detailed Product Description
S32750 Duplex Stainless Steel Pipe ASME A789 A790 A450 A530 For Industry
Quick Detail:
Our TOBO offer an extensive range of Seamless Pipes to our clients. We also deal with super duplex pipes. Our stainless steel seamless pipe was width used in Mining, Energy, Petrochemical, Chemical Industry, Food plant, Paper plant, Gas and Fluid Industry etc
1 Standard: ASTM A790/A789 PICKLED AND ANEANLED
2 Material: S31803/S31500/S32750 etc
3 OD: 6MM---710MM
Thickness: 2.5mm---50mm
4 Certificate: PED, ISO, GB, GOST
5 Producing method: cold drawn and cold rolled
Stainless Steel Pipe:
1. Material: S31803/S31500/S32750 ETC
2. O.D: 6mm-710mm , Thickness:2.5-50mm
3. A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the Thpe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
4. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
5. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the lenss than the permitted in Section 9 of Specification A999/A999M
6. Butt Weld End: According to ANSI B 16.25
7. Pipe Marking: Specified in A999/999M, include
“Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
8. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
9. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
10. MTC: TOBO Official Original MTC paper will be supplied for each order.
We can dealing with a wide range material as following:
Material Grade:
| American Standard | Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Others:TP405,TP409, TP410, TP430, TP439,... |
| Europen Standard | 1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571,1.4438, 1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501 |
| Russia Standard | 08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2, 08Х18Н12Б,10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т, 08Х18Н12Т,08Х17Н15М3Т,12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ |
| Inspection & Test |
| 1. 100% PMI, Spectro Chemical Analysis Test for Raw Material |
| 2. 100% Dimension & Visual Examination |
| 3. Mechanical Properties Test Include Tension Test Flattening Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test |
| 4. 100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT) |
| 5. Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor) |
| 6. Straightness Test (optional) |
| 7. Roughness Test (optional) |
| 8. Intergranular Corrosion Test(optional) |
| 9. Impact Test (optional) |
| 10. Grain Size Determinations (optional) |
| NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION. |
