Active Member
|
[China]
Address: #888 xingrong road, jiading district, Shanghai
Contact name:Frank
Shanghai Powermax Fastener Co., Ltd. |
|
|
ASTM A194 Grade 7 Quenched and tempered alloy steel heavy hex nuts
Heavy hex nut coatings include zinc, zinc yellow and hot dipped galvanized. We offer heavy hex nuts in standard (inch) and metric sizes ranging from ¼ to 4 inches.
Heavy hex nuts are slightly wider and thicker than the standard hex nut and they pair with large diameter, high strength, heavy hex bolts. Heavy hex nuts advantages include a greater length of thread engagement and better resistance to stretching or widening.
SIZE: 1/4" - 4", M6 -M100 .
STANDARD: ASME B18.2.2
THREAD: ASME B1.1 , UNC, UNF, UN8
FINISHED: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Chrome, H.D.G.
A194 Grade 2:Carbon steel heavy hex nuts.
A194 Grade 2H:Quenched and tempered carbon steel heavy hex nuts.
A194 Grade 7:Quenched and tempered alloy steel heavy hex nuts.
A194 Grade 7L:Quenched and tempered alloy steel heavy hex nuts, Charpy impact tested.
A194 Grade 8:Stainless AISI 304 heavy hex nuts.
A194 Grade 8M:Stainless AISI 316 heavy hex nuts.
NOTE: There are other grades of A194. Those listed here are the ones we receive the most requests for. For information on other types, Please contact us.
| A194 CHEMICAL PROPERTIES | ||||
| Element | 2, 2H | 7 | 8 (AISI 304) | 8M (AISI 316) |
| Carbon | 0.4% min | 0.37 - 0.49% | 0.08% max | 0.08% max |
| Manganese | 1.0% max | 0.65 - 1.1% | 2.0% max | 2.0% max |
| Phosphorus, max | 0.04% | 0.04% | 0.05% | 0.05% |
| Sulfur, max | 0.05% | 0.04% | 0.03% | 0.03% |
| Silicon | 0.40% max | 0.15 - 035% | 1.0% max | 1.0% max |
| Chromium | 0.75 - 1.2% | 18.0 - 20.0% | 16.0 - 18.0% | |
| Nickel | 8.0 - 11.0% | 10.0 - 14.0% | ||
| Molybdenum | 0.15 - 0.25% | 2.0 - 3.0% | ||
| A194 MECHANICAL PROPERTIES | ||||||
| Grade | Marking | Size | Tempering Temp.Fahrenheit | Proof Load Stress, ksi | Hardness Brinell | |
| Min | Max | |||||
| 2 | 2 | 1/4" - 4" | 0 | 150 | 159 | 352 |
| 2H | 2H | 1/4" - 1-1/2" | 850 | 175 | 248 | 327 |
| 2H | 2H | 1-1/2" - 4" | 850 | 175 | 212 | 327 |
| 7 | 7 | 1/4" - 4" | 1100 | 175 | 248 | 327 |
| 8 | 8 | 1/4" - 4" | - | 80 | 126 | 300 |
| 8M | 8M | 1/4" - 4" | - | 80 | 126 | 300 |
Notes:
The markings shown for all grades of A194 nuts are for cold-formed
and hot-forged nuts. When nuts are machined from bar stock, the nut
must additionally be marked with the letter B. The letters H &
M indicate heat-treated nuts.
Properties shown are those of coarse and 8-pitch thread heavy hex
nuts.
