Jinhu Color Powder Coating Co.Ltd |
|
Industrial Pure Polyester TGIC FREE Powder Coating for Metal Finish
BRIEF INTRODUCTION
Electrostatic polyester powder coating gives an excellently
homogenous surface. Due to a high level of production control,
areas of thicker paint at the edges and corners or the 'orange
peel' texture usually associated with powder coating are minimized.
Electrostatic polyester powder coating is a more cost effective
option than PVDF coatings but not as durable. Baked at low
temperatures, it is an energy efficient coating technology suitable
for interior and exterior applications. Large panels, curves and
complex forms can be easily coated. UV stable and highly weather
resistant, its performance can be tailored to meet the demands of
particular applications and various degrees of gloss can be
specified.
RANGE
High Gloss, Gloss, Semi Gloss & Matt
Fine Texture & Ripple
Antique Finishes and Tinted Lacquers
Metallic Effects
Sparkle Effects
Fluorescent Effects
ADVANTAGES
High solid content, excellent fullness of film
Thick coating is available
High sanding performance & good abrasion
High application efficiency & easy to apply
Primer can improve hardness of top coat & save the consumption
of topcoat
SPECIFICATION
Main Material | Polyester resin,barium sulfate,titanium dioxide |
Surface Type | Gloss,matte,wrinkle,sandgrain,antique,Hammer,crocodile skin,wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern |
Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
Average particle size : 35 - 45um | |
Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
Coverage:15m2 based on 60μm | |
Pencil hardness: ASTM D3363,H-2H | |
Adhesion :GB/T 9286-1998,0 grade | |
Bending test:GB/T 6742 ,=<2mm | |
Cupping test:GB/T 9753,>=7mm | |
Direct and reverse impact (ASTM D2794) : > 50kg.cm | |
Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion | |
Heat and moisture test GB/T 1740,>=1000 hours,no change | |
Application Schedule | Applied by : Electrostatic spraying devices |
Curing schedule :10 minutes at 200 ºC | |
Advantage | Good adhesion,anti-corrosion,UV resistant, strong coating film, |
Accurate colors, good leveling | |
Shelf Life | 12 months |
STORAGE CONDITIONS
Temperature: ≤30ºC
Humidity Conditions: Dry, Cool and Ventilated
Storing Requirement: Cannot be piled up over 4 cartons;
Seal the PE bag after using;
Away from VOC, fire and heat;
Validity: 6 months (If the parameters are tested to be qualified,
the product still can be used expire date)