Active Member
|
[Ukraine]
Address: Room 310-2, Building 3, No.56 Lingzhi Road, Xinghe World, Xuanwu district, Nanjing 210028, China
Contact name:Coco chen
Jinhu Color Powder Coating Co.Ltd |
|
|
RAL 3020 Traffic Red Pure Polyester Powder Coating Fusion Bonded Epoxy Powder Coating
Most powder coatings have a particle size in the range of 2 to 50 μ
(Microns), a softening temperature Tg around 80 °C, a melting
temperature around 150 °C, and are cured at around 200 °C. for
minimum 10 minutes to 15 minutes (exact temperatures and times may
depend on the thickness of the item being coated). [1] For such
powder coatings, film build-ups of greater than 50 μ (Microns) may
be required to obtain an acceptably smooth film. The surface
texture which is considered desirable or acceptable depends on the
end product. Many manufacturers actually prefer to have a certain
degree of orange peel since it helps to hide metal defects that
have occurred during manufacture, and the resulting coating is less
prone to showing fingerprints.
The products include high light ( above 86%),
glazed (76%-85%),
matt(20%-50%),
super matt (below 20%).
We also offer a variety of shiny products according to the needs of users.
Technic Data:
| Description | Powder coating | |
| Another Name | Powder paint,Electrostatic powder coating, thermosetting powder coating | |
| Type | Polyester resin series | |
| Main Material | Polyester resin and hardner | |
| Advantage | Good adhesion,good mechanical property,strong coating film, | |
| excellent insulation,anticorrosion,energy-efficient,convenient operation. | ||
| Application Field | Apply to anticorrosive and insulative products: | |
| Anticorrosion pipeline,rebar,bridge,steel structure, | ||
| pylon,tank,marine fittings,electric control cabinet, | ||
| switch components,lighting sets. | ||
| Application Condition | Electrostatic spray/Triboelectric gun spray. | |
| Recommended curing condition:200 degree centigrade for 12 minutes | ||
| (object surface temperature),range from 190 degree centigrade | ||
| for 20 minutes to 210 degree centigrade for 8minutes. | ||
| Recommended film thickness:50~80um, range from 40~150um | ||
| Physical Property | Specific gravity | 1.4~1.8g/cm3 as per formula and color |
| Particle size | average 35~40um | |
| Test Condition | Substrate | 0.5mm thickness cold rolled steel sheet |
| Pretreatment | Remove rust and grease | |
| Film thickness | 50~80um | |
| Curing temperature | 200 degree centigrade for 10 minutes | |
| Application Field | Apply to anticorrosive and insulative products: | |
| Anticorrosion pipeline,rebar,bridge,steel structure, | ||
| pylon,tank,marine fittings,electric control cabinet, | ||
| switch components,lighting sets. | ||
| Application Condition | Electrostatic spray/Triboelectric gun spray. | |
| Recommended curing condition:200 degree centigrade for 12 minutes | ||
| (object surface temperature),range from 190 degree centigrade | ||
| for 20 minutes to 210 degree centigrade for 8minutes. | ||
| Recommended film thickness:50~80um, range from 40~150um | ||
| Physical Property | Specific gravity | 1.4~1.8g/cm3 as per formula and color |
| Particle size | average 35~40um | |
