Active Member
|
[Ukraine]
Address: Room 310-2, Building 3, No.56 Lingzhi Road, Xinghe World, Xuanwu district, Nanjing 210028, China
Contact name:Coco chen
Jinhu Color Powder Coating Co.Ltd |
|
|
RAL1020 olive yellow pure epoxy powder coating with Excellent corrosion resistance
Gives hard durable protective finishes with excellent adhesion and chemical resistance. Epoxy Powder Coating has good electrostatic charging properties and excellent transfer efficiency.
Recommended uses include general industrial components and applications requiring a good all round coating, such as household goods. When long term exterior durability or heat stability is essential a powder from our range of epoxy-polyesters and polyesters should be selected.
When flexibility, adhesion, toughness and corrosion resistance is required, epoxy powder coating is used extensively today. This coating is based on epoxy resins, which is manufactured in a way that enables the possibility of coating a high film build without any defect in the coating when cured.
Advantages:
Excellent corrosion resistance
Excellent chemical tolerance
High mechanical performance
Recommend for interior
Powder physical properties:
Specific gravity: 1.4-1.7 (for color and gloss vary)
Particle size distribution: 100% less than 100 microns (based on the special requirements of coating adjusted)
Fluidity: 120-140
Curing condition:
Type A - 200°C (work piece temperature), 15 minutes (flat or Matt)
Type B -180°C (work piece temperature), 15 minutes (highlight)
Type C -140°C (work piece temperature), 15 minutes (highlight)
Substrates and Pre-treatment
In order to obtain optimal anti-corrosion properties it is recommended to apply a chemical pretreatment prior to powder coating application
Test Item
| Test Standard
| Test Indicator | |||
| Type A | Type B,C | ||||
| Impact resistance | ISO6272 | GB/T1732-1993 | 40cm | 50cm | |
| Cupping test | ISO1520 | GB/T9753-1988 | 5mm | 8mm | |
| Adhesion(Planning grid method) | ISO2409 | GB/T9286-1998 | Grade 0 | ||
| Crook | ISO1519 | GB/T6742-1986 | 3mm | 2mm | |
| Pencil hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H | ||
| Salt test | ISO7253 | GB/T1771-1991 | > 500 hours | ||
| Heat test | ISO6270 | GB/T1740-1979 | > 1000 hours | ||
| Heat resistance | 100°C/24 hours (white) | Paul Light character (best) | |||
We offer powder coating capabilities that include a wide spectrum of colors, thickness, textures, softness, edge coverage, flexibilities, machinabilities, smoothness and temperature ranges.
Free samples are available.
