Active Member
|
[China]
Address: ZHUO DAO QUAN Road 108# KAI LE GUI YUAN B Building 8 Floor. Hongshan District,Wuhan, P.R.China
Contact name:
Hubei Cono Technology Co,Ltd |
|
|
Description
The NightSeer thermal clip on converts your existing day scope to thermal and provides excellent target acquisition and aiming capabilities varmint hunter, military, law enforcement, or security personnel.
The NightSeer comes with an easy-to-control polarity mode that lets you switch among three options.
Why limit yourself to traditional White hot /black hot?
With intelligent coloration, you can pick up your target in a much easy way!
Features
▼ Simple and Quick conversion of daytime scope to Thermal
▼ Fully ruggedized, weatherproof, multidirectional thumbstick control comes standard.
▼ Quick-Release Mount
▼ Rapid start-up
Technical Data
| Thermal Imager Scope NightSeer335 Series Technical Data Sheet | |
| NS335-C | |
| Microbolometer | |
| Type | Uncooled |
| Resolution, pixels | 384×288 |
| Frame Rate, Hz | 50 |
| Pixel size, um | 17 |
| NETD | less than 50mk |
| Optical Characteristics | |
| Objective Lens | 35mm, F/1.1 |
| Magnification, X | 1 |
| Zoom | 2x/PIP/4x |
| Eye Relief, mm | 24mm |
| Dioptre Adjustment, D | / |
| FOV | 10.6°×8.0° |
| Close-up range,m | 5 |
| Display | |
| Type | OLED |
| Resolution, pixel | 1024×768 |
| Power Supply | |
| Battery Type | 2XCR123 |
| Power Supply | 3.6~7.2 |
| External Power Supply | 5v USB |
| Operation Time on a battery set(standard version),h | 5 |
| Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
| Video recorder(optional) | |
| Video/Photo format | avi/jpg |
| Built-in memory(optional) | 32G |
| Wifi Channel(optional) | |
| Frequency | 2.4 |
| Reception range,m | 15 |
| Physical Parameters | |
| Degree of Protection | IP67 |
| Operation Temperature | —2°C~+50°C |
| Storage Temperature | —40°C~+70°C |
| Shock and Vibration | 1000g/ms |
| MTBF | More than 800h |
| Weight without batteries,g | 400 |
| Dimension, mm | 150×65×67 |
Thermal Clip On Quality Control
We understand that lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronics devices on the market.
