Active Member
|
[China]
Address: ZHUO DAO QUAN Road 108# KAI LE GUI YUAN B Building 8 Floor. Hongshan District,Wuhan, P.R.China
Contact name:
Hubei Cono Technology Co,Ltd |
|
|
The NightSeer is a solid-state, uncooled, long-wave infrared, magnified dedicated weapon scope intended for day and night engagements without the need to remove the sight from the rifle. The 24/7 mission capability is only one of the strengths of NightSeer. The thermal imaging technology also allows you to detect targets by cutting through snow, dust, smoke, fog, haze, and other atmospheric obscurants. Unlike the use of laser targeting or near-infrared illumination to augment night vision equipment, the NightSeer Thermal Imaging Weapon Sight is extremely difficult to detect with other devices as it emits no visible light or RF energy.
In addition to being the smallest and lightest in the class, NightSeer Thermal Imaging Weapon Sights are characterized by its simple and intuitive controls, functions and features that are layered in one thumb controlled button, make operation realized in a better way. Apart from the traditional black hot/white hot, NightSeer brings intelligent coloration mode into the unit which helps uses to detect the target easier and more efficient.
Our Advantage:
◆ High sensor resolution
◆ Long detection distance
◆ Smooth and incremental digital zoom
◆ Comfortable for long observation
◆ Built-in video recorder
◆ Live internet video sharing
◆ Fully waterproof
◆ Color palettes
◆Limited 2-year warranty
| Technical Data Sheet of Thermal Imager NightSeer335 Series | |
| NS335-R | |
| Microbolometer | |
| Type | Uncooled |
| Resolution, pixels | 384×288 |
| Frame Rate, Hz | 50 |
| Pixel size, um | 17 |
| NETD | less than 50mk |
| Optical Characteristics | |
| Objective Lens | 35mm, F/1.1 |
| Magnification, X | 1.9 |
| Zoom | 2x/PIP/4X |
| Eye Relief, mm | 60mm |
| Dioptre Adjustment, D | ±5 |
| FOV | 10.6°×8.0° |
| Close-up range,m | 5 |
| Display | |
| Type | OLED |
| Resolution, pixel | 1024×768 |
| Detection Range (1.7m target) | 1350 |
| Recognition Range (1.7m) | 450 |
| Detection Range (2.3m target) | 1800 |
| Recognition Range (2.3m) | 600 |
| Reticle | |
| Accuracy(per pixel) | 0.62MOA |
| Click range(x,y) | 238 MOA |
| Power Supply | |
| Battery Type | 2XCR123 |
| Power Supply | 3.6～7.2 |
| External Power Supply | 5v USB |
| Operation Time on a battery set(standard version),h | 5 |
| Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
| Video recorder (optional) | |
| Video/Photo format | avi/jpg |
| Built-in memory(optional) | 32G |
| Wifi Channel(optional) | |
| Frequency | 2.4 |
| Reception range,m | 15 |
| Physical Parameters | |
| Degree of Protection | IP67 |
| Operation Temperature | —25°C～+50°C |
| Storage Temperature | —40°C～+70°C |
| Shock and Vibration | 1000g/ms |
| MTBF | More than 800h |
| Weight without batteries,g | 380 |
| Dimension, mm | 176×65×67 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronic devices on the market.
