|
[China]
Trade Verify
Address: 606-607, Bld 3A,Hecheng Shiji, Wuhe metro station, Bantian, Longgang, Shenzhen, China
Contact name:Polly
Team Source Display |
|
Verified Suppliers
|
|
|
Description of 1.3 inch round lcd display
TST013QVHG-06D is small square LCD display, 1.3 inch with 240x240 resolution, interface is SPI, standard brightness is 600 cd/m2. We're available to make the customization of touch screen as per your requirements. Operating temperature is from -20℃ to +70℃, storage temperature is from -30℃ to 80℃, Outline dimension is 35.6x37.7x1.6 mm, LCD driver IC is GC9A01. This LCD display is widely using in smart watches, smart wearable and many other products.
Specification of 1.3 inch round lcd display
| LCD type | LCD display |
| Part No. | TST013QVHG-06D |
| Resolution | 240x240 |
| Outline dimension | 35.6x37.7x1.6mm |
| Active Area | 32.40x32.40mm |
| Brightness | 600 cd/m2 |
| Interface | SPI |
| Viewing angle | All o'clock |
| Operating temperature | -20℃ to +70℃ |
| Storage temperature | -30℃ to +80℃ |
Drawing of 1.3 inch round lcd display
1. The LCD module is made of glass. Don't give excessive external shock, or drop from a high place.
2. If the TFT LCD screen is damaged and the liquid crystal leaks out, do not lick and swallow. When the liquid
is attach to your hand, skin, cloth etc, wash it off by using soap and water thoroughly and immediately.
3. Don't apply excessive force on the surface of the LCM.
4. If the surface is contaminated, clean it with soft cloth. If the LCM is severely contaminated, use Isopropyl alcohol/Ethyl alcohol to clean. Other solvents may damage the polarizer. The following solvents is especially prohibited: water , ketone Aromatic solvents etc.
5. Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water
droplets, moisture condensation or a current flow in a high-humidity environment.
6. Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.
1. More than 18 years experience, strong background in TFT and
P-cap design.
2. Faster Support in Front and After-sales service. Support
customer from the products' design to the final products.
3. Local sales and engineer team support in European for good
communication.
4. Follow a people-oriented, quality and customer-first approach in
all of our dealings, fast developing together with customers.Follow
a people-oriented, quality and customer-first approach in all of
our dealings, fast developing together with customers.
5. We have our own capacititve touch panel workshop, can make
design and production of different CTP designs
