Active Member
|
[China]
Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China
Contact name:Amy
Shenzhen FRIDA LCD Co., Ltd |
|
|
21.5 Inch Lcd Display 1920x1080 Lvds Interface 30 Pins HR215WU1-120
General Description:
HR215WU1-120 is a 21.5-inch LCD module with a-Si TFT-LCD technology, which is equipped with WLED backlight, no backlight driver, and no touch. HR215WU1-120 typically features: SRGB, surface matte, wide viewing angle, landscape mode, white LED backlight, widescreen, signal terminal, flip-flop, TCO 6.0, E/S 6.0 compliant. operating temperature is 0 ~ 50°C and storage temperature is -20 ~ 60°C. HR215WU1-120 is recommended for use in computer monitors.
Specifications:
| Parameter | Specification | Unit |
| Active area | 476.64(H) × 268. 11 (V) | mm |
| Number of pixels | 1920(H) ×1080(V) | pixels |
| Pixel pitch | 0.24825(H) ×0.24825(V) | mm |
| Pixel arrangement | RGB Vertical stripe | - |
| Display colors | 16.7M | colors |
| Display mode | Normally Black | - |
| Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
| Weight | 1900 (typ.) | g |
| Surface Treatment | Anti-glare, 3H | - |
| Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remarks |
| Power Supply Voltage | VDD | -0.5 | 5.5 | V | Ta = 25℃ |
| Logic Supply Voltage | VIN | VSS-0.3 | VDD+0.3 | V | |
| Operating Temperature | TOP | 0 | +50 | C | |
| Storage Temperature | TST | -20 | +60 | C |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
| Power Supply Voltage | VDD | 4.5 | 5.0 | 5.5 | V |
| |
| Power Supply Current | IDD | - | 800 | 1400 | mA | ||
| In-Rush Current | IRUSH | - | - | 3 | A | ||
| Permissible Input Ripple Voltage | VRF | - | - | 200 | mV | VDD = 5.0V | |
High Level Differential Input Threshold Voltage | VIH | - | - | +100 | mV | ||
Low Level Differential InputThreshold Voltage | VIL | - 100 | - | - | mV | ||
| Differential input voltage | VID | 200 | - | 600 | mV | ||
| Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 | VIH=100mV, V =- 100mV | ||
| LED Voltage | VL | 3.05 | 3.2 | 3.4 | V | ||
| LED Channel Voltage | VL | 45.75 | 48 | 51 | V | ||
| LED Channel Current | IL | - | 60 | - | mA | ||
| LED Lifetime | 30,000 | - | - | Hrs | I =60 mA | ||
Power Consumption | PD | - | 4.9 | 6.25 | W | ||
PBL | - | 11.52 | 12.24 | W | IL=60 mA | ||
Ptotal | - | 16.42 | 18.49 | W | |||
Optical Specifications:
VDD = 5.0V, Frame rate = 60Hz, Clock = 78MHz, IBL = 120mA, Ta =25±2℃
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
Viewing Angle range | Horizontal | Θ3 | CR > 10 | - | 89 | - | Deg. | |
Θ9 | - | 89 | - | Deg. | ||||
| Vertical | Θ12 | - | 89 | - | Deg. | |||
Θ6 | - | 89 | - | Deg. | ||||
Viewing Angle range | Horizontal | Θ3 | CR > 5 | - | 89 | - | Deg. | |
Θ9 | - | 89 | - | Deg. | ||||
| Vertical | Θ12 | - | 89 | - | Deg. | |||
Θ6 | - | 89 | - | Deg. | ||||
| Luminance Contrast ratio | CR |
Θ = 0° (Center) Normal Viewing Angle | 700 | 1000 | - | |||
| Luminance of White | Yw | 200 | 250 | - | cd/m2 | |||
| White luminance uniformity | ΔY | 75 | 80 | - | % | |||
Reproduction of color | White | Wx | 0.283 | 0.313 | 0.343 | |||
Wy | 0.299 | 0.329 | 0.359 | |||||
| Red | Rx | 0.617 | 0.647 | 0.677 | ||||
Ry | 0.309 | 0.339 | 0.369 | |||||
| Green | Gx | 0.277 | 0.307 | 0.337 | ||||
Gy | 0.603 | 0.633 | 0.663 | |||||
| Blue | Bx | 0.116 | 0.146 | 0.176 | ||||
By | 0.026 | 0.056 | 0.086 | |||||
Response Time | Rising+Fal ling | Tr +Tf | 14 | 21 | ms | |||
| Cross Talk | CT | - | - | 2.0 | % | |||
Interface Connection:
Module Side Connector : UJU IS100-L300-C23 or Equivalent
User Side Connector : JAE FI-X30H or Equivalent
| Pin No | Symbol | Function |
| 1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) |
| 2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) |
| 3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) |
| 4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) |
| 5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) |
| 6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) |
| 7 | BIST | L(GND):Black, H(3.3V):Rotational Pattern |
| 8 | RXOC- | Negative Transmission Clock (ODD) |
| 9 | RXOC+ | Positive Transmission Clock (ODD) |
| 10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) |
| 11 | RXO3+ | PositiveTransmission data of Pixel 3 (ODD) |
| 12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) |
| 13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) |
| 14 | GND | Power Ground |
| 15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) |
| 16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
| 17 | GND | Power Ground |
| 18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) |
| 19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
| 20 | RXEC- | Negative Transmission Clock (EVEN) |
| 21 | RXEC+ | Positive Transmission Clock (EVEN) |
| 22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) |
| 23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
| 24 | GND | Power Ground |
| 25 | NC | Not connection, this pin should be open |
| 26 | NC | Not connection, this pin should be open |
| 27 | NC | Not connection |
| 28 | VDD1 | Power Supply:+5V |
| 29 | VDD2 | |
| 30 | VDD3 |
Handling Precautions:
1.Be sure to turn off the power supply when inserting or disconnecting the cable .Please insert for too much stress not to join a connector in the case of insertion of a connector.
2.Be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist.
3.Since the front polarizer is easily damaged, pay attention not to scratch it.
