Medical Gauze Drying And Slitting Combined Machine
- Application:
It is suitable for the bleached white gauze. It is unwound through
the A-frame and dried in the dryer to wind the finished product or
be cut and slit into the required gauze pieces.
- Equipment composition:
Active unwinding A-frame -- cloth feeding frame -- 2 roller padder,
water tank -- 2 column dryer - -deviation correction device --
slitting and winding machine.
- Performance:
a. The active unwinding A-frame is movable and can be adjusted left
and right to ensure the regularity of operation;
b. The cloth feeding rack is equipped with 1 set of elastic frame
and 1 set of electric suction device
c. The two-roller padder is composed of two ∮300 rollers, the
active roller is 304 stainless steel roller, and the passive roller
is nitrile rubber roller.
d. The new 2-column dryer is fully sealed, the thickness of the
sealed door is 80mm, heat preservation and energy saving, automatic
tracking and compensation of the drying room temperature; equipped
with 12 drying cylinders, diameter ∮800mm, can withstand 6-8kg
pressure; transmission is chain The cylinder adjusts the elasticity
of the chain; each dryer is equipped with an independent steam trap
to ensure the hydrophobic effect; the dryer is equipped with a set
of automatic humidity adjustment system at the top of the dryer,
frequency conversion adjustment; the whole machine uses 2 sets of
automatic oiling system.
e. The slitting and winding machine is equipped with two frequency
conversion motors, 10 sets of pneumatic pressure cutting knives,
and the cutting device is adjusted by imported slide rails.
4. Main parameters:
a. Mechanical width: 1200mm-2400mm;
b. Mechanical speed: 10-260m / min;
c. Total power: 39KW;
d. Roll diameter: 600-800mm.
Schematic of Drying And Slitting Combined Machine