|
[China]
Trade Verify
Address: 150 Fenxi Road, Shangjia Urban Industrial Park, Building 2, Wanjiang District, Dongguan City, Guangdong Province
Contact name:Michael Chan
Perfect International Instruments Co., Ltd |
|
Verified Suppliers
|
|
|
60T Hydraulic Compression Testing Machine Universal Material Tensile Bend Tester
Purpose:
This material universal test machine is the use of fuel tank mounted under the host and mainly used for tensile, compression, bending and shear tests of metal or non-metallic materials, suitable for metallurgy, construction, light industry, aviation, aerospace, materials, universities, research institutes and other fields.Test operations and data processing meet GB228-2002 "metal materials at room temperature tensile test method" requirements.
Main Specifications:
| Item Name | 60T Hydraulic Compression Testing Machine Universal Material Tensile Bend Tester |
| Model No | PT-1100-600 |
The Measuring Range of Test Force
| 12 kN – 600 kN
|
Test Force Display value Accuracy
| ± 1% |
Displacement Measurement Resolution
| 0.01mm
|
| Deformation measurement | The standard configuration for the gauge length 50mm, the maximum deformation of 10mm |
| Deformation Measurement Accuracy | ±0.5%
|
| Constant force, Constant deformation, Constant Displacement Control Range | 0.4% ~ 100% FS
|
| Constant force, Constant deformation, Constant Displacement Control Accuracy | When the set value <10% FS, within ± 1.0% of set value. When the set value ≧10% FS, within ± 0.5% of set value |
| Deformation Rate Control Accuracy | When the rate <0.05% FS, within ± 2.0% of set value. When the rate ≧0.05% FS, within ± 0.5% of set value |
Pistons Maximum Speed
| 100mm / min
|
| Maximum Tensile Test Space | 650mm (including the piston stroke) |
| Maximum Compression Space | 480mm (including the piston stroke).
|
Flat Specimen Clamping Thickness
| 0-15mm |
| Round Specimen Clamping Diameter | Ø 13- Ø 26mm or Ø 26- Ø 40mm |
Pressure Plate Dimensions
| Ø 120mm |
Bending Test Spacing
| 350 mm
|
Branch Roll Width
| 140 mm
|
Fulcrum Diameter
| Ø 50 mm
|
| Piston Stroke | 250mm |
| Clamping Method | Hydraulic clamping
|
| Sensor and Amplifier | oil pressure sensor, plug in a PC programmable |
| Dimensions | Host: 900×600×2250 mm Oil Source: 1400×700×850 mm
|
Machine Description:
(1) Host:
Host is the use of the fuel tank mounted under the host, the tensile space located at between of the upper crossbeam and lower crossbeam, and the compression, bending, shears test space located at between of the lower crossbeam and a host base. The host structure show as below
(2) Transmission System
Lower crossbeam’s rising and falling is the use of the motor, cycloid reducer, chain gears, and lead screw nut drive, to adjust the space of tensile and compression.
(3) Hydraulic System (piano desktop oil source)
A. Hydraulic principles
As shown below is adaptive load oil into the throttle governing system.Hydraulic oil in the tank through the motor to drive high pressure gear pump into the oil passage, flow through the check valve, 10μ high pressure filter, pressure valve, servo valve, into the cylinder. Computer sends a control signal to the servo valve, control and direction of the opening of the servo valve to control the flow into the cylinder to achieve constant test force, constant displacement control.
B. Feature:
(a) High pressure gear pump, low noise, and smooth pressure.
(b) Dynamical Systems and operations console integrated design, easy to operate, and saving experiments space.
(c) Surface after spray treatment, appearance is beautiful.
