Blue Color Self Adhesive Collision Film Wreck Wrap Self Adhesive Film

Application Directions

1. The surface should be clean and dry. Note: Wrap A Wreck Film must be applied on a dry surface but when applied it will resist moisture penetration.
2. Pull a 2" - 4" starter piece from the width of the roll and apply with simple Hand pressure against surface.
3. Hold the roll in both hands and begin to unwind the film over the damaged area, Overlap from the bottom to the top so that the film has a natural shingle effect.
4. Apply hand pressure (where there are sharp edges or broken glass use gloves or heavy cloths) to seal adhesive.

Description

1.Blue Color Self Adhesive Collision Film Wreck Wrap Self Adhesive Film is a clear self-adhesive protection film designed to be applied following the breaking of vehicle glass during accidents or repairs. Crash Wrap provides effective protection against the elements, enabling the vehicle to be stored outside while keeping the car interior clean and free from leaks.

2.Perforated every 700mm, Crash Wrap Protection Film is very quick and easy to install. Once applied, the film adheres well to the vehicle bodywork forming a durable seal. Due to its strong high grab adhesive, Crash Wrap is suitable for high speed driving until replacement vehicle glass is fitted and is clear to provide good visibility.

3.Crash Wrap Protection Film also removes cleanly from the vehicle, leaving behind minimal adhesive residue.