|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
●ISO 105-B02/B04/B06
●ISO4892-2
● ISO11341
●AATCC TM16
●TM169
●ASTM G155-1/155-4
●JIS L0843
●SAEJ1960/1885
●JASOM346
●IEC61215
● IEC62688
●custom-made
●SUS 304 stainless-steel with thickness 2.5 mm
●Easy to operate,Multi-language to choose
●Add compressor
●Water filtration system
ASTM G155 Xenon Test Chamber Laboratory Testing Equipment for Plastic is to test the product undergoneillumination/rain/condensation/temperature/humidity/wind and any other climatic changes.This aging tester mainly for the test of non-ferrous/organic/rubber/plastic and building materials.
ASTM G155 Xenon Test Chamber Laboratory Testing Equipment for Plastic can provide data for user to evaluate the products' properties and performance in order to improve the product qualities.
| Name | ASTM G155 Xenon Test Chamber Laboratory Testing Equipment for Plastic |
| Model | XL-750 |
| Internal dimensions D*W*H | 950*950*850 mm |
| Overall dimensions D*W*H | 1300*1420*1800 mm |
| Specimen Capacity | 42pcs |
| Specimen holder size | 95*200mm |
| Irradiation Source | 1 piece of 6500 W water-cooled xenon lamp with inner quartz and outer borosilicate filter |
| Irradiance Range | 100~1200 W/㎡ |
| Bandwidth Measurement | 280nm~800nm |
| Chamber Temperature Range | Ambient ~100℃±2°C |
| Black Panel Temperature | BPT 35 ~85℃±2°C |
| Relative Humidity Range | 50~98% R.H±5% RH |
| Water Spray cycle | 1～9999H59M, adjustable |
| Controller | programmable color display touch screen controller, PC Link, R-232 interface |
| Radiometer | Tolerance: ±5% |
| Heating system | Nichrome heater |
| Cooling system | Mechanical compression refrigeration system |
| Refrigerating unit | French TECUMSEH compressor |
| Humidification system | External isolation, stainless steel surface evaporation humidifier |
| Air circulation | Centrifugal wind fan |
| Water supply system | Automatic water supply; Water purification system |
| Safety device | Humidifier dry-combustion protection; over-temperature protection; over-current protection; Refrigerant high-pressure protection; Water shortage protection, Earth leakage protection; |
| Interior material | SUS304 stainless steel |
| Exterior material | Steel Plate with protective coating |
| Thermal insulation | Polyurethane foam |
| Observation window | Interior lighting , double-layer thermo stability silicone rubber sealing |
| Power Supply | AC380V 50HZ |
| Standard | ISO 105-B02/B04/B06, ISO4892-2, ISO11341. AATCC TM16, TM169, ASTM G155-1/155-4, JIS L0843, SAEJ1960/1885, JASOM346, PV1303, IEC61215, IEC62688 |
Test Area and Sample Holder
Test area is made of stainless-steel.
Flat type workroom
A shelf for placing test specimens
Viewing Window
Large viewing window
Can observe samples during testing
Control Panel
Programmable color display touch screen controller, PC Link, R-232
interface
Program: 100 groups in 999 sections
Irradiation Source - Xenon Arc Lamp
Irradiation Source with 1 piece of 1500w air-cooled xenon lamp with inner quartz and outer borosilicate filter
Average Lamp Life is 1600hours.
●A variety of alternative filtration system.
●Water spray function.
●Relative humidity control.
●Chamber air temperature control system.
●Irregularly shaped sample holder.
●Cheap xenon arc lamps.
●Xenon lamp aging test instrument easy to install and easy to use
and basically no routine maintenance.
●Xenon arc lamp life depends on the level of irradiance used,
general lamp life of 1600 hours. Lamp replacement convenient,
long-lasting xenon ●lamp aging tester filter to maintain the
required spectrum to provide protection.
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
●Provide test solution
If you are end user, you have some test samples need environmental testing, you are not clear the tests, please contact us to get test solution. Will response
within 10 hours after got your requests.
If you are trading dealer, you got request from your customers, please let us know, our team will response you to send test solution for you.
●Send specification and quotation
If you are interested in some models, you want to get specifications and quote, don’t hesitate to contact our elite team to get brochure and best price.
Will offer you one-stop service including machine, transportation, and installation, calibration, and spare parts…et
●Warranty & After Sales Service
3 Years Warranty, Lifelong Follow-up Services. We have a professional after-sales team, if you have any questions during operation, we will supply solutions to you with 24 hours.
Q:Do you have an agent?
A:Currently we have agents in Europe, Asia, North America, South
Africa, and can provide sales and technical services.
Q:Can we come to your factory to study and train?
A:Welcome to our factory for study and training, we provide this
service free of charge.
Q:Can you send engineers to our company?
A:Yes, sure. We will communicate in advance to facilitate the
bringing of tools and components
Q:Can I install and debug calibration on site?
A:Yes, we can send technicians and engineers to the customer site
for installation, commissioning and calibration.
Q:What are the modes of transportation?
A:Air, sea, rail, multimodal transport.
Q:What is the packaging?
A:Standard export wooden box packaging, solid and firm.
Q:How do you calibrate the equipment?
A:We have our own calibration and third-party calibration such as
ISO17025
Q:Is there a door to door service?
A:Yes, there is door to door service. We will arrange a one-stop
service.
Q:What are the payment methods?
A:Payment methods are T/T, Paypal, L/C, VISA
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
