Environmental Simulation Temperature Testing Equipment With Centrifugal Wind Fan

Environmental Simulation Temperature Climate Cabinet Humidity Oven

♦Production Of Environmental Simulation Temperature Climate Cabinet Humidity Oven

Environmental Simulation Temperature Climate Cabinet Humidity Oven is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries. Temperature 35 ℃, humidity 65% RH, no low temperature test box.

♦Throry Of  Environmental Simulation Temperature Climate Cabinet Humidity Oven

To perform temperature & humidity test, cold resistance test, thermal cycle test, ultra low temperature test, high temperature test, storage condition, and calibration function.

Standard and custom models to suit different test specimens.

♦Advantages Of Environmental Simulation Temperature Climate Cabinet Humidity Oven

1.Temperature control and display unit
2.Humidity control and display unit
3.PID programmable color touch screen controller, network connection computer
4.Multi-language interface
5.USB and Ethernet
6.The internal material is 304 stainless steel, mirror surface
7.SUS304 stainless steel punching sample shelf 2pcs
8.A standard test hole, located at the left side of the work room
9.Water re-circulation system that reduced water use and a series of water pipes
10.Install 4 castors for ease moving, and with brakes function.
11.Mechanical compression refrigeration system
12.Long time to perform 85℃ 85%RH test
13.CE mark

♦Parameter Of  Environmental Simulation Temperature Climate Cabinet Humidity Oven

♦Main Details Of  Environmental Simulation Temperature Climate Cabinet Humidity Oven

1.Controller PID programmable color touch screen controller, network connection computer. Can edit 100 programs 100 segments. LIB also can preset program into the controller based on user testing requirements. The set system language is English for standard.	2.Heating Element Nichrome heater

3.Cable Hole A standard test hole, located at the left side of the work room, is provided with a sleeve inside to prevent moisture from entering the insulation layer. Equipped with flange. The standard inner hole diameter is 50mm. Soft silicone plug seal; Metal enclosure closed, beautiful designed.	4.Insulation 10cm thick polyurethane foam and insulation cotton; Better insulation performance, degradation resistance, environmental protection, noise reduction.

♦Other Products 

►Thermal Cycling Chamber Accelerated Aging Temperature Impact

►Electronic Salt Spray Corrosion Test Chamber For Laboratory / Research Center

►Laboratory Rubber Ozone Test Chamber 

♦Please Contact Us