|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
Description
IEC 62660 55 ℃ Thermal Cell Stabilized Temperature Test Chamber,environmental chambers for Battery Testing are designed and manufactured to meet various types of battery testing requirements of its customers by keeping all safety options in mind against any harmful explosions or ignitions and user safety while testing these batteries for environmental stress conditions
Technical Specification
| Name | IEC 62660 55 ℃ Thermal Cell Stabilized Temperature Test Chamber |
| Model | T-100 |
| Internal Dimension (mm) | 400*500*500 |
| Overall Dimension (mm) | 860*1050*1620 |
| Temperature Range (℃) | -20℃ ～+150 ℃ |
| Low type | A: -40℃ B:-70℃ C -86℃ |
| Heating rate | 10℃/min (15℃/min) |
| Temperature Fluctuations | ± 0.5 ℃ |
| Temperature Deviation | ± 2.0 ℃ |
| Interior Volume | 100 liters |
| Controller | Programmable color LCD touch screen controller, Multi-language interface, Ethernet , USB |
| Cooling System | Mechanical compression refrigeration system |
| Exterior Material | Steel Plate with protective coating |
| Interior Material | SUS304 stainless steel |
| Power Supply | 380V |
| Maximum Noise | 65 dBA |
Test Procedure
IEC 62660 55 ℃ Thermal Cell Stabilized Temperature Test Chamber,The Cell or battery to be tested shall be heated for a period of time necessary to reach a homogeneous stabilized temperature of 57 ± 4 ℃, measured on the external case, this period of time depends on the size and design of cell or battery and should be assessed and documented, if this assessment is not feasible.
the exposure time shall be at least 6 hours for small cells and small batteries, and 12 hours for large cells and large batteries, then the cell or battery at 57 ± 4 ℃ shall be subjected to one short circuit condition with a total external resistance of less than 0.1ohm.
 | This Short circuit condition is continued for at least one hour after the cell or battery external case temperature has returned to 57 ± 4 ℃, or in the case of large batteries, has decreased by half of the max. temperature increase observed during the test and remains below that value.
IEC 62660 55 ℃ Thermal Cell Stabilized Temperature Test Chamber |
Battery Industry Standards
IEC 62660 55 ℃ Thermal Cell Stabilized Temperature Test Chamber mainly for testing the battery module of Electric bike, Electric Motorcycles, etc. These series meet the standard compliance of IEC62619, UL2580 and GB31485-2015. Including short circuit, thermal test, drop test and crush test, etc.
1. IEC 62660-2
2. ISO 12405-4: Electrically propelled road vehicles – Test specification for lithium-ion traction battery packs and systems Part 4: Performance testing
Battery Test chamber
IEC 62660 55 ℃ Thermal Cell Stabilized Temperature Test Chamber is suitable for testing various performance indexes of aerospace products, electronic instruments, materials, electronic products and various electronic components under the condition of rapid temperature change.
