|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
Description
IEC 62660-2 NSS aging electronics salt spray test equipment is used to assess the anti-corrosion ability of materials and their protective layers, as well as the process quality comparison of similar protective layers. It can also be used to assess the salt spray corrosion resistance of certain products.
Products Parameters
| Name | IEC 62660-2 NSS Aging Electronics Salt Spray Test Equipment |
| Model | S-250 |
| Internal dimensions | 640*1000*500(mm) |
| Overall dimensions | 810*1800*1180(mm) |
| Temperature range | Ambient ～60℃ |
| Humidity range | 95% ~ 98% RH |
| Temperature fluctuations | +/- 0.5 ℃ |
| Temperature deviation: | +/- 2.0 ℃ |
| Test time | 1~999 hours, settable |
| Spray deposition | 1～2ml / 80cm2 · h |
| Spray type | Continuous / Periodic |
| Temperature Controller | LED display, P.I.D+S.S.R. microcomputer integrated controller |
| Temperature sensor | PT100Ω / MV A-class |
| Salt fog collected | Fog collector and fog measure cylinder |
| salt water filtration | Salt water filter near the suction tubes( Avoid the nozzle blockage) |
| Salt water preheating | Saturated air barrel |
| Spraying system | Atomizer tower and Spray nozzles (Fog is more fine and uniform distribution) |
| Interior /Exterior material | Glass fiber reinforced plastics |
| Standard configuration | Sample bracket / sample holder / spray nozzle / Fog collectors / measure cylinder |
| safety device | over-temperature protection, water shortage protection, over current protection, earth leakage protection |
| Sealing | Hydrostatic hood seal |
| Standard | ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, ISO 9227 |
| Power Supply | 220V 50HZ |
Advantage
 | Electronics salt spray test equipment
1. Place the electronic product sample holder 2. Standard and customizable 3. Glass and steel, corrosion-resistant, long service life |
In practical use of electronic products will encounter rain, salt water erosion, resulting in the fading of electronic products, corrosion, aging, etc. ,
LIB INDUSTRY specializes in the production of testing the performance of electronic products salt fog chamber, suitable for factories, manufacturers, laboratories, university research.
Salt Test Equipment Details
 |  |
| Large Capacity Test Area | Quartz Spray Nozzle |
Test Requirements
1. The temperature in the salt spray test chamber is 35±2 degrees C;
2. At any location in the salt spray test equipment, a continuous zeroing of 16h of salt mist settlement is collected with a funnel with an area of 80cm, with an average of 1.0-2.0 ml of solution collected per hour;
3. The salt spray test equipment can be sprayed evenly, not affected by the test sample, the salt mist shall not be sprayed directly onto the test sample, the top and inner wall of the salt mist test chamber, and other parts of the condensate shall not drip on the test sample, and the air pressure inside and outside the salt mist test chamber must be balanced
