Active Member
|
[China]
Address: The west of Dahoutun Village,Jiaolai town,Jiaozhou ,Qingdao
Contact name:Aggie
Qingdao Liangta Steel Structure Co., Ltd |
|
|
ISO Standarded Angle Transmission Steel Tower Electric Power Lattice Steel Tower
1. Production decription
Related information of the transmission steel tower.
Design code : ANSI10-97 - Design of latticed steel transmission structures
IEC 60826-Design criteria of overhead lines
DL/T 5154-2002 Technical Regulation of Design For Tower and Pole Structures of Overhead
Transmission Line
Welding: AWSD1.1-American welding society D1.1 structural welding code -steel
Galvanization: ASTM A123-Standards specification for zinc (hot dip galvanized)
GB/T13912 Metal coating ,technical requirement and test mothod for hot dip galvanizrd metal parts.
Material : High strength low alloy structural steel: Q420B which is equivalent to ASTM A572 Gr60
High strength low alloy structural steels: Q355B which is equivalent to ASTM A572 Gr50 or S355JR
Carbon Structural Steel: Q235B which is equivalent to ASTM A36 or S235JR
Advantage
Qingdao Liangta Steel Structure Co.Ltd is a professional
manufacturer in transmission steel tower from the year 2009.
1. We make sure every your requirement will be answered
in 24 hours.
2. Customized design is available.our engineer can
design drawings as your requirment.
3. After sales service. We can help to install the
transmission tower .If needed ,we even can supply an engineer to
the site.
As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature.
Catalogue of the transmission line towers as followings :
Test report of transmission steel towers.
2. Product capacity
We have 5 production line for manufacturing transmission steel towers ,We can supply 2000 tons steel towers
per month .And we have enough room to place more transmisson steel towers production line if needed .
| Numbers of angle production line | 5 |
| Production capacity per month | 2000 tons |
3. Technical support
Our engineer and drawer has lots of designing ,lofting experience of transmission steel towers .
Which we can supply a overall solution of all the towers .
| Service you can get from our engineer | tower design,tower lofting ,tower weight calculation and loading plans |
| Software they used | TTA,STWXP,TMA,LMA,Daoheng |
4. Quality control
We have very strict quality control in every tranmsission steel towers .
Material incoming control:chemical and physical test
Zinc coating thinknes inspection
We usually has two ways of trial assembly for tranmsmission steel towers : trial assembly before galvanzation
and after galvanization
6. Hot dip galvanization and painting
7. Package and delivery
Package we usually do as our clients requirment .Usually for transmission steel towers,we fixed angle steel by
steel wire to bundles and use special material to protect zinc .
For fasteners ,we use bucket ,bag or box.
8. Company introduction
Qingdao Liangta Steel Structure Co., Ltd. ,established in year
2009,is a leading professional manufacturer in the field of
transmission steel towers (the voltage up to 1000kv),
telecommunication towers, monopoles, substation structures and
rooftop towers. We also supply steel profile products as per
customers 'requirement.
The factory located in Jiaozhou bay of Qingdao, covered an area of
over 60,000 square meters with an annual production capacity 40,000
tons.
Location:
Less than one hour drive from Qingdao International Airport, 1 hour
drive from Qingdao sea port.
• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems
Certificate: OHSAS 18001:2007
We also have many experiences of foreign projects, like
Philippines, Myanmar, Iraq, Mauritania and so on.
Welcome to contact us ,we make sure your every question will be
answered in time .
9. Product catalogue:
