Home Companies Qingdao Exceed Fine Chemicals Co.,Ltd

White Solid MDI / PTMG Prepolymer Hardness 85 For PU Rods

Qingdao Exceed Fine Chemicals Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: No.166, Zhengyang Middle Road, Chengyang District, Qingdao City, Shandong Province, China. 266000

Contact name:Louis.liu

Inquir Now

Qingdao Exceed Fine Chemicals Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

White Solid MDI / PTMG Prepolymer Hardness 85 For PU Rods

Country/Region china
City & Province qingdao shandong
Categories Plastic Rods
InquireNow

Product Details

White solid MDI/PTMG Prepolymer Hardness 85

 

1. Description

This is an MDI-terminated PTMG prepolymer of low viscosity and easy processing. It enjoys a high performance and high abrasion resistance.

 

2. Application

It applies to make PU rods, castor wheels, PU pad, PU sheet, rubber roller, sieve plate, etc.

 

3. Product Specification

 

NCO Content (%)6.0±0.2
Density (25℃)/(g/cm3)1.11
Viscosity at 85℃ (Mpa.s)1400
Appearance at 25℃White solid

 

4. Operation introduction

 

Ratio (Prepolymer/1,4BDO)100/6.1
Mix temperature/℃ (Prepolymer/1,4BDO)80/40
Gel time/min10
Postcure (110℃)/h48

 

5. Physical Properties

 

Hardness/ shore A85±2
Tensile Strength/ Mpa44
100% Modulus/MPa6
300% Modulus/MPa17
Elongation at break/%472
Tear strength (without nick) / kN/m75
Tear strength (with nick) / kN/m19
Rebound/%61
DIN Abrasion(mm3)36

 

 

6. Shelf life

The storage time of original packing is 6 months at the above condition from the date of production.

 

7. Package

20kg or 200kg per steel drum

 

8. Safety

Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.

If Contact Occurs:

Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Seek medical attention if allergic reactions occur.

Eyes: Immediately flush with water for at least 15 minutes, contact a physician.

Ingestion: If swallowed, contact a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as directed by medical personnel. Never give anything by mouth to an unconscious person.

Hot Products

Low Free TDl/Polyether Prepolymer Equivalent to Desmodur E15 1. Description LFE245 based on TDI - ...
White solid MDI/PTMG Prepolymer Hardness 85 1. Description This is an MDI-terminated PTMG prepolymer ...
White solid MDI/PTMG Prepolymer Hardness 90 1. Description This is an MDI-terminated PTMG prepolymer ...
White solid MDI/PTMG Prepolymer Hardness 95 1.Description This is an MDI-terminated PTMG prepolymer ...
DMTDA Dimethyl Thio-Toluene Diamine Product Name: Dimethyl Thio-Toluene Diamine (DMTDA) Formula...
DETDA Ethacure 100 Product name: Diethyl methyl benzene diamine; Diethyltoluenediamine; DETDA CAS#: ...