Home Companies Shenzhen Wofly Technology Co., Ltd.

AFK High Pressure Stainless Steel Pressure Regulator Precision 25Mpa For Nitrous Oxide

Shenzhen Wofly Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.

Contact name:Catlin Zeng

Inquir Now

Shenzhen Wofly Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

AFK High Pressure Stainless Steel Pressure Regulator Precision 25Mpa For Nitrous Oxide

Country/Region china
City & Province shenzhen guangdong
Categories Valves
InquireNow

Product Details

Product Description for Single stage pressure reducer

 

The pressure reducer is often used in laboratories or factories, and all gas contacts that use gas need to be depressurized before they can be used. Our product is specially designed for pressure reduction, and the workmanship is very fine, which is much more beautiful than the products of the same industry

 
Applicable scenarios
Wall mounted installation of secondary pressure relief device
Installation of single pressure reducer
Specification for Single stage pressure reducer
 

ORDERING INFORMATION

R11LBDFG0000P
Item

Body

Materia

Body Hole

Inlet

pressure

Outlet

pressure

Pressure gaugeInlet sizeOutlet sizemark
R11L:316AD:3000 psiF:0-500 psiG:MPa gauge00:1/4 " NPT (F)00: 1/4 " NPT(F)P:Panel mounting
 B:BrassBE:2200 psiG:0-250 psi 01:1/4 " NPT (M)01: 1/4 " NPT(M)N:Needle valve
  DF:500 psil:0-100 psiP:Psig/bar gauge23: CGA33010:1/8 " ODN:Needle valve
  G K:0-50 psi 24: CGA35011:1/4 " ODD:Diaphragm valve
  J L:0-25 psiW:No gauge28: CGA66012:3/8 " OD 
  M   28: CGA66015:6mm OD 
      30: CGA59016:8mm OD 
      52: G5/8 "-RH(F)  
      63: W21.8-14H(F)  
      64: W21.8-14LH(F)  

 

Material List of Co2 Regulators
1BodySS316L, brass, nickel plated brass ( Weigh :0.9kg)
2CoverSS316L, brass, nickel plated brass
3DiaphragmSS316L
4StrainerSS316L(10um)
5Valve SeatPCTFE,PTFE,Vespel
6SpringSS316L
7Plunger Valve CoreSS316L
Technical Data OF Pressure Regulator for Co2 Gas Cylinders
1Maximun Input Pressure500,3000 psig
2Output Pressure Range0~25, 0~50, 0~100, 0~250, 0~500 psig
3Safety Testing Pressure1.5 times of maximum input pressure
4Working Temperature-40°F~ +165°F (-40°C~ +74°C )
5Leakage Rate2×10-8 atm cc/sec He
6CV Value0.08

 

Installation instructions and precautions of pressure reducing valve

 

1. Before installing the pressure reducing valve, the pipeline must be cleaned, and the gas shall be used for continuous purging to completely remove the magazines and particles, such as scrap iron, when cutting the pipeline;

 
2. The filter must be installed at the upstream of the pressure reducer, otherwise the system particles will damage the valve seat, causing internal leakage of the pressure regulator, rising downstream pressure, and easily damaging the outlet pressure gauge or other equipment. It is recommended to use a filter element with a precision of no less than 2 microns;
 
3. It is not recommended to use thread or liquid raw material tape for NPT thread installation. Improper operation may lead to liquid flowing to the filter element in the valve, which may lead to blockage of the filter element. Finally, there is no pressure at the valve outlet, or the flow is too low;
 
4. In the flow state, turn the handle clockwise to increase the outlet pressure. Turning the handle counterclockwise may cause the thread to get stuck, or the handle is loose and cannot be adjusted again;
 
5. It is not recommended to use the pressure reducing valve as a stop valve for a long time, otherwise the valve seat may be deformed, resulting in unstable flow;
 
6. Handle with care to avoid any impact, especially the pressure reducing valve with pressure gauge. The pressure gauge is a sensitive element, which may be damaged by external force.

 

Project Case

 

This is the layout of the air supply direction of the whole room at the air supply end. We have a professional design team to draw and design drawings by visiting the site, and then professional construction personnel will carry out construction according to the drawings.

FAQ

 
1. who are we?
We are based in Guangdong, China, start from 2011,sell to Southeast Asia(20.00%),Africa(20.00%),Eastern Asia(10.00%),Mid East(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),Central America(5.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),North America(5.00%). There are total about 51-100 people in our office.

 

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

 

3.what can you buy from us?
pressure regulator,Tube fittings,solenoid valve,Needle valve,check valve

 

4. why should you buy from us not from other suppliers?
We have a couple of years with professional engineers and dedicated technicians.can provide security products for you

 

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,Western Union;
Language Spoken:English,Chinese

Hot Products

Product Description for Single stage pressure reducer The pressure reducer is often used in ...
Product Description for Single stage pressure reducer The pressure reducer is often used in ...
design features of high pressure regulator 350 bar 1.single-stage reduce structure 2.Use hard-seal ...
AFK Stainless Steel High Pressure Cylinder Argon co2 Carbon Dioxide Gas Pressure Regulator Valve ...
Product Description of Gas Cylinder Pressure Regulator Features of Stainless Steel Pressure ...
Product Description of R11 Gas Pressure Regulator R11 Series stainless steel pressure regulator is ...