|
[China]
Trade Verify
Address: Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.
Contact name:Catlin Zeng
Shenzhen Wofly Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
inlet cylinder CGA320 CO2 pressure regulator aquarium
Material List | Tenchnical Data | ||
Body | 316L, Brass | Max inlet pressure | 500, 3000 psig |
Roof | 316L, Brass | Outlet pressure | 0~25, 0~50, 0~100, 0~250, 0~500 psig |
Diaphragm | 316L | Proof pressure | 1.5 times of maximum rated pressure |
Filter mesh | 316L (10μm) | Working temperature | -40°F-+165°F(-40°C-+74°C) |
Valve seat | PCTFE, PTFE, Vaspel | Leakage rate | 2*10-8 atm cc/sec He |
Spring loaded | 316L | Cv | 0.08 |
Valve disc regulation pole | 316L | Body Thread | 1/4" NPT ( F ) |
1) Single -stage reduce Structure.
2) Use hard-seal between body and diaphragm
3) Body Thread : 1/4" NPT ( F )
4) Easy to sweep inside body
5) Filter mesh inside
6) Panel mountable or wall mounted
ORDERING INFORMATION
| R11 | L | B | D | F | G | 00 | 00 | P |
| Item | Body Materia | Body Hole | Inlet pressure | Outlet pressure | Pressure gauge | Inlet size | Outlet size | mark |
| R11 | L:316 | A | D:3000 psi | F:0-500 psi | G:MPa gauge | 00:1/4 " NPT (F) | 00: 1/4 " NPT(F) | P:Panel mounting |
| B:Brass | B | E:2200 psi | G:0-250 psi | 01:1/4 " NPT (M) | 01: 1/4 " NPT(M) | N:Needle valve | ||
| D | F:500 psi | l:0-100 psi | P:Psig/bar gauge | 23: CGA330 | 10:1/8 " OD | N:Needle valve | ||
| G | K:0-50 psi | 24: CGA350 | 11:1/4 " OD | D:Diaphragm valve | ||||
| J | L:0-25 psi | W:No gauge | 28: CGA660 | 12:3/8 " OD | ||||
| M | 28: CGA660 | 15:6mm OD | ||||||
| 30: CGA590 | 16:8mm OD | |||||||
| 52: G5/8 "-RH(F) | ||||||||
| 63: W21.8-14H(F) | ||||||||
| 64: W21.8-14LH(F) |
Application Area
Company profile
My dear friend, if you wanna know more about our products, send me inquiry or email ,we will reply you within 24 hours!
The following information should be included in your inquiry:
1. Inlet actual working pressure
2. Outlet actual working pressure
3. Inlet conenction and size
4. Outlet conenction and size
5. Material: brass or stainless steel
6. If you have special flow rate requirements, please indicate it.
7. Quantity
Notes: The ranges of pressure gauges, inlet connector, outlet connector can be equiped according your requirements. Please write the above descriptions as possible as you can. If you can not confirmed it at the moment, just send us inquiry, we also can recommend our regular model for you.
