Active Member
|
[China]
Address: No. 7 Tengren Road, Niulanshan Industrial Park, Shunyi District, Beijing
Contact name:
BEIJING KOREA TECHNOLOGY CASTER CO.,LTD |
|
|
What should be done well in the production of
screws?
In many enterprises, due to the low degree of automation and long
process route, there may be
equipment abnormalities, quality abnormalities, material abnormalities, personnel abnormalities
and so on in each process. For the production problem of hardware screw factory, Hanke caster
will take you to understand it!
1, Safety of workers: heatstroke prevention in summer and safety in
normal production are the
first factors to be considered.
2, No matter when it is insisted, the surface of stainless steel
screws cannot adhere to organic
juice (such as melons and vegetables, noodle soup, phlegm, etc.), which constitutes organic acid
in the case of water and oxygen. The metal screw processing plant will corrode the metal surface
by organic acid for a long time.
3, The attachments of dust or dissimilar metal particles, the
attachments in humid air and the
condensate of stainless steel screws connect them into a micro battery, which leads to
electrochemical reaction and damage to the protective film, which is called electrochemical corrosion.
4, In polluted air (such as atmosphere rich in sulfide, carbon
oxide and nitrogen oxide), sulfuric
acid and acetic acid liquid points are formed in the presence of condensate, resulting in chemical
corrosion of hinge screws.
5, Adhesion of stainless steel surface is rich in acid, alkali and
salt substances (such as alkali
water and lime water splashing on the decoration wall), resulting
in partial corrosion.
The noise sources of standard parts enterprises shall take measures
such as vibration reduction,
noise elimination and sound insulation to meet the emission standards at the factory boundary;
Production raw materials and finished products shall be put into the warehouse, shed and orderly.
It is forbidden to pile up and store them in the open air. Waste materials generated in the production
process shall not be stacked or abandoned at will; All new standard parts surface treatment enterprises
must enter the professional surface treatment Park and carry out construction according to
environmental protection requirements.
Furniture Leveling Feet Parameter
Furniture Leveling Feet Size
Furniture Leveling Feet Material
| Name | KTC Foot |
| Model | KTF-V |
| Type | Cushioning Type (NBR/Urethane Pad) Series |
| Application | Conveyor, Automatic facilities, Amusement machine, Vending machine |
Furniture Leveling Feet Describe
Furniture Leveling Feet Scope of application
KTC (Bejing Korea Technology Caster Co., Ltd.) was founded in 2007. KTC is a modern
company specialzingin the production of multi function &high quality CASTER and
KT FOOT based on best design and design technology.
The company is headquartered in Niulanshan Industrial Zone,Shunyi District, Beijing. KTC
adopts international advanced production testing equipments, professional intelligent
production management system and professional design flow. Now the company produces
multi function & high quality production, such as KT CASTER and KT FOOT, among which
high quality of height adjusting CASTER,shockproof type CASTER, high quality of height
adjusting CASTER, shockproof type CASTER,high load CASTER and level adjusting FOOT
are widely used in the world's advanced automation equipment and semiconductor e
quipment industry.
In order to manufacture the world's highest level of products,KTC
use the best processing
technology and equipment. And KTC continuously launches world top level of new products.
KTC's s also has set up a branch in Korea, so it is favored by theusers of various fields around
the world.
