|
[China]
Trade Verify
Address: BuildingA306,SanyuanliRoad,Baiyun District,Guangzhou.China Post Code:510410
Contact name:Leo Lee
A1 AUTO PARTS CONNECTION |
|
Verified Suppliers
|
|
|
Engine Motor Mount 50820-SFE-J00 Fits Honda Odyssey RB1
Related suspension engine mounts for HONDA:
50820-TS6-H03,50820-TR0-A81,50820-TS6-H81
ENGINE MOUNTING HONDA 50850-SMA-982
50820-SDA-A01 RUBBER ASSY., ENGINE SIDE MOUNTING
9297 A4517 50820-SDB-A01
ACURA-TL-2005-2008 HONDA-ACCORD-2005-2007
related complete kits HONDA Accord:
50830-SDA-A02
50810-SDA-A02
50820-SDA-A01
50850-SDA-A00
Tips:
Replacement of engine mounting.
Engine mounts are made of a hard rubber material which allows them
to absorb these vibrations. When a motor/car mount is damaged or
broken, not only will you feel excess vibration in the car, other
parts in the engine can get misaligned and ultimately break since
the engine is not in its precise location.
1) The engine jitter is very obvious when reversing.
2) The engine shook when the car started.
3) There is a noise from the engine.
3) In the case of idle speed, the steering wheel will vibrate and
the brake pedal will vibrate obviously.
The main purpose of motor mounts is to attach a car's engine to the
frame of the vehicle. A secondary purpose is to dampen or reduce
engine vibration so the occupants of the car don't feel the
constant shaking or vibrating of the engine while it's running.
If it is not replaced in time, it will destroy the overall balance and cause damage to the others.
Related HONDA CR-V models suspension engine mounting parts:
The above pictures are from the screenshots of the catalogue If you need detailed information please contact us directly.
OEM number of Honda CR-V suspension parts:
<
| 52365-SR3-004 | HONDA CR-V RD1/RD2 1997-2001 | 51722-SWE-T01 | HONDA CR-V RE3/RE4 2007- |
| 52370-S04-G00 | HONDA CR-V RD1/RD2 1997-2001 | 52722-SWA-A01 | HONDA CR-V RE3/RE4 2007- |
| 52385-ST3-G01 | HONDA CR-V RD1/RD2 1997-2001 | 50810-S7D-003 | HONDA CR-V RD4/RD5/RD6/RD7/RD9 2001-2006 |
| 52385-ST3-G01 | HONDA CR-V RD1/RD2 1997-2001 | 50821-S9A-023 | HONDA CR-V RD4/RD5/RD6/RD7/RD9 2001-2006 |
| 52371-SWA-A01 | HONDA CR-V RE3/RE4 2007- | 50841-SR3-983 | HONDA CR-V RD1/RD2 1997-2001 |
| 52371-SWA-A01 | HONDA CR-V RE3/RE4 2007- | 50842-ST0-N81 | HONDA CR-V RD1/RD2 1997-2001 |
| 51396-SWA-E01 | HONDA CR-V RE3/RE4 2007- | 50828-S77-003 | HONDA CR-V RD1/RD2 1997-2001 |
| 51350-SWA-E01 | HONDA CR-V RE3/RE4 2007- | 50810-SR3-983 | HONDA CR-V RD1/RD2 1997-2001 |
| 52400-SR3-000 | HONDA CR-V RD1/RD2 1997-2001 | 50824-S04-013 | HONDA CR-V RD1/RD2 1997-2001 |
| 52343-SR3-004 | HONDA CR-V RD1/RD2 1997-2001 | 50805-S04-000 | HONDA CR-V RD1/RD2 1997-2001 |
| 51225-SR3-003 | HONDA CR-V RD1/RD2 1997-2001 | 50842-ST0-N10 | HONDA CR-V RD1/RD2 1997-2001 |
| 50810-ST7-000 | HONDA CR-V RD1/RD2 1997-2001 | 50841-ST0-N10 | HONDA CR-V RD1/RD2 1997-2001 |
Question:
I have a 2009 automatic HONDA CR-V. Whenever I put it on reverse it
shakes a lot. What should I do?
Answer:
Change your transmission mount right and left, engine mount the
rubber collapses and gives that anoying shaking in gear and more
when the a/c is on. these two side mounts is what supports the
engine so they take the most beating compared to the front and
rear, front engine mount is more of a stiffener same as the rear.
The side mounts may not be cracked but are collapsed. you'll see
the difference when you compare them. front engine mounts crack
often but this will not solve the shaking only the forward and rear
movement of the egnine/trans.
RELATED PARTS MAZDA/FORD RANGER:
1. DRUM BRAKE SHOE S8139 BT50 4X4 2008-2009
2. OUTER TIE ROD END AB31-3290-AA FITS ranger MAZDA BT50
AB31-3289-AA
AB31-3289-AA/AB31-3290-AA/1727226 /1729240
