Home Companies Guangdong Uchi Technology Co.,Ltd

CQC Surge Protection Device SPD With Lightning Protection Class 1-4

Active Member

Contact Us

[China]

Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.

Contact name:Amy

Guangdong Uchi Technology Co.,Ltd

CQC Surge Protection Device SPD With Lightning Protection Class 1-4

Country/Region	china
City & Province	dongguan
Categories	Other Security & Protection Products

Product Details

High arresting capacity Surge Protection Device With Lightning Protection Class 1-4

OBV10-I-50

Lightning current discharge arrester with spark gap for the use in three-phase TT and TN-S systems.They provide extremely high discharge cappabilities with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger.

· Connectable lightning current and surge arrestors
· High arresting capacity up to 50 kA (10/350μs) per pole
· Combination arrestors for buildings with lightning protection system
· Simple standard hat rail mounting
· Labelled connections
· Usable in systems with lightning protection class 1-4

Application:

• SPDs for CCTV is mainly used for supervisory control system, preventing product from lightning

strike and surge.

• Protect the video equipment effectively and ensure the image can display normally5.Inhibit the

overvoltage pulse issue fromthe transmission line on the camera effectively, Avoiding the video

surveillance equipment damage due to overvoltage pulse.

• Offer surge protection for almost any products application in power, instrumentations and controls,

network and data lines, coax and etc.

• For Radio Antennas, GPS Antennas, CATV, CCTV and Satellite TV.

Advantage:

• Lower Prices

• Low Capacitance

• High Discharge Current

• Continuous and repeated protection in intense environment

Technical Parameters

System voltage Un	500/600VDC	1000VDC
Max. continous operation AC voltage	585VDC-615VDC	585VDC-615VDC in series connection
Norminal discharge current(8/20μs)	20kA	20kA
Maximum discharge current (8/20μs)	40kA	40kA
Voltage protection level (L-N)	2.4kV	4kV
Response time (L-N) tA	≤25ns	≤25ns
Environment temperature Tu	-40℃~70℃	-40℃~70℃
Status indicator	Green(good) / red(need replacement)	Green(good) / red(need replacement)
Mounting	35mm Standard Guide	35mm Standard Guide
Cross section of wire (Min.)	16mm2	16mm2
Cross section of wire (Max.)	25mm2	25mm2
Casing material	PA6 UL94-V0	PA6 UL94-V0
Degree of protection	IP20	IP20
Remote Signalling	Inside preinstalled optional	Inside preinstalled optional

Feature:

1,Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.
2,Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against
lightning induced surges.
3,Enhanced surge protection.
4,For mounting on 35mm DIN rails acc. to EN 60715
5,It can effectively ensure the equipments work properly

Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):

Type No.	Rated Voltage(V) Un	Continuous Voltage Uc(V~)	Standard Discharge Current In(KA)	Max Discharge Current Imax(KA)	Protection Level(KA~)	Response Time(ns)
DGM1(2)-D5	220/380	275/320 385/420	5	10	1.2	≤25
DGM1(2)-D10			10	2	1.6
DGM1(2)-C20			20	40	1.8
DGM13-B30			30	60	.2.2
DGM3(4)-B40			10	80	2.4
DGM(4)-B60			60	100	2.8
DGM-N-PE		220/255	40/60	60/80	1.2	≤100