Home Companies Guangdong Uchi Technology Co.,Ltd

600V DC Power Surge Protection Device Environment Temperature -40-85 Degrees Celsius

Active Member

Contact Us

[China]

Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.

Contact name:Amy

Guangdong Uchi Technology Co.,Ltd

600V DC Power Surge Protection Device Environment Temperature -40-85 Degrees Celsius

Country/Region	china
City & Province	dongguan
Categories	Solar Chargers

Product Details

Environment temperature Range (-40℃~+85℃) Surge Protection Device / IP 20

OBV10-I-15

Heavy duty AC Surge Protection Device (SPD) for high risk, low tolerance electrical service entrance applications. The OBV10-I-15 provides protection against the direct and indirect effects of lightning and is particularly useful in a high lightning area where the risk of heavy surge current or even direct strike is high, i.e. buildings equipped with lightning rods.

Lightning current arrestors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The voltage-limiting, high-performance spark gaps provide several benefits. A short response time, a low protection level and high current leakage capability with long service life.

Application:

• SPDs for CCTV is mainly used for supervisory control system, preventing product from lightning

strike and surge.

• Protect the video equipment effectively and ensure the image can display normally5.Inhibit the

overvoltage pulse issue fromthe transmission line on the camera effectively, Avoiding the video

surveillance equipment damage due to overvoltage pulse.

• Offer surge protection for almost any products application in power, instrumentations and controls,

network and data lines, coax and etc.

• For Radio Antennas, GPS Antennas, CATV, CCTV and Satellite TV.

Advantage:

• Lower Prices

• Low Capacitance

• High Discharge Current

• Continuous and repeated protection in intense environment

Technical Parameters

System voltage Un	500/600VDC	1000VDC
Max. continous operation AC voltage	585VDC-615VDC	585VDC-615VDC in series connection
Norminal discharge current(8/20μs)	20kA	20kA
Maximum discharge current (8/20μs)	40kA	40kA
Voltage protection level (L-N)	2.4kV	4kV
Response time (L-N) tA	≤25ns	≤25ns
Environment temperature Tu	-40℃~70℃	-40℃~70℃
Status indicator	Green(good) / red(need replacement)	Green(good) / red(need replacement)
Mounting	35mm Standard Guide	35mm Standard Guide
Cross section of wire (Min.)	16mm2	16mm2
Cross section of wire (Max.)	25mm2	25mm2
Casing material	PA6 UL94-V0	PA6 UL94-V0
Degree of protection	IP20	IP20
Remote Signalling	Inside preinstalled optional	Inside preinstalled optional

Feature:

1,Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.
2,Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against
lightning induced surges.
3,Enhanced surge protection.
4,For mounting on 35mm DIN rails acc. to EN 60715
5,It can effectively ensure the equipments work properly

Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):

Type No.	Rated Voltage(V) Un	Continuous Voltage Uc(V~)	Standard Discharge Current In(KA)	Max Discharge Current Imax(KA)	Protection Level(KA~)	Response Time(ns)
DGM1(2)-D5	220/380	275/320 385/420	5	10	1.2	≤25
DGM1(2)-D10			10	2	1.6
DGM1(2)-C20			20	40	1.8
DGM13-B30			30	60	.2.2
DGM3(4)-B40			10	80	2.4
DGM(4)-B60			60	100	2.8
DGM-N-PE		220/255	40/60	60/80	1.2	≤100