Hubei Superdrill Mechnical Equipment Co.,Ltd |
|
Water Well Drilling Tungsten Carbide Hard Rock 8 1/2 Inch Iadc537 TCI Roller Tricone Rock Drill Bits
Whatsapp/Phone:+86 18186993613
E-mail: sales@superdrill.com.cn
The TCI Tricone bits drilling for medium to hard rock formation.
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
The hard formation TCI tricone bits can be used to drill hard and abrasive formation. Wear resistance tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life.
Milled tooth Tricone Rock Drill Bits:
The milled tooth (steel tooth) tricone bits drilling for soft to medium rock formation.
The soft formation milled tooth tricone bits are used to drill low compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetrations rates possible. Wear resistance hard facing is used to control tooth wear. On the softest bit types this hard facing completely covers the bit teeth.
The medium formation milled tooth tricone bits are used to drill high compressive strength, medium rock formation. Shoot projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
Type | Tricone Bit (3 7/8"~26", steel/milling tooth or TCI) |
Application | oil field, water well, geothermal, underground foundation, quarry |
Formation | sticky, soft, medium hard, hard formations |
Bearing | open/sealed bearing, rubber/metel seal bearing |
packing | wooden/steel box |
payment term | T/T, LC |
MOQ | one piece |
Delivery | within 25days for standard model, within 35days for customized |
Description of drill bit
(1) Cutting Structure of this series tricone rock bit :
The durability of premium tungsten carbide inserts is improved with
new formulas and new techniques for insert bit.The wear-resistance
of teeth is enhanced with premium tungsten carbide hardfacing on
the tooth surfaces for steel tooth bit.
(2) Gauge Structure of this series tricone rock bit :
Multiple gauge protection with gauge trimmers on heel and gauge
inserts on the gauge surface of the cone, tungsten carbide inserts
and hardfacing on the shirttail increases gauge holding capability
and bearing life.
(3)Bearing Structure of this series tricone rock bit :
High precision bearing with two thrust faces. Balls lock the
cone.Hardface heard bearing surface. Cone bearing inlaid with
friction-reducing alloy and then silver-plated. Abrasion resistance
and seizure resistance of the bearing are improved and suitable for
high rotary speed.
(4)Seal and Lubrication of this series tricone rock bit :
The advanced metal seal package consists of two metal seats and two
elastic energizers. Compressed energizers ensure good contact being
kept on two sealing surfaces of metal rings by elastic force, and
achieve the bearing seal. In the drilling, metal seal are
relatively dynamic, and the energizers are static. This will
improve the reliability and durability of bearing seal. The
pressure compensator system and advanced grease can greatly
increase the lubricating reliability.
Main product
(1) IADC code: 116 117 126 127 136 137 216 217 226 226 316 317 326
327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111
121 131 346 347 417 427 437 517 527 537 617 627 637 737 837 832 415
425 435 445 525 625 635 416 427 436 446 447 516 526 537 547 516 536
535
(2) Sizes: From 2 7/8 to 26"larger sizes for hole opener bit
,reamer bit
(3)bearing type: sealed bearing and non-sealed bearing ;HJ(metal
sealed journal bearing) ;HA (rubber sealed journal bearing
;aircooled bearing type
(4)formation or layer: soft ,medium soft ,hard,medium hard,very
hard formation
IADC CODE SELECTION
IADC | WOB | RPM | Application |
(KN/mm) | (r/min) | ||
111/114/115 | 0.3-0.75 | 200-80 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk |
116/117 | 0.35-0.8 | 150-80 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk |
121 | 0.3-0.85 | 200-80 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
124/125 | 180-60 | ||
131 | 0.3-0.95 | 180-80 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
136/137 | 0.35-1.0 | 120-60 | |
211/241 | 0.3-0.95 | 180-80 | medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds. |
216/217 | 0.4-1.0 | 100-60 | |
246/247 | 0.4-1.0 | 80-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
321 | 0.4-1.0 | 150-70 | medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble |
324 | 0.4-1.0 | 120-50 | |
437/447/435 | 0.35-0.9 | 240-70 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone |
517/527/515 | 0.35-1.0 | 220-60 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
537/547/535 | 0.45-1.0 | 220-50 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
617/615 | 0.45-1.1 | 200-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
637/635 | 0.5-1.1 | 180-40 | hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble |
Note: Above limitts of WOB and RRPM should not be used simultaneously |
PIN SIZE
Bit Diameter | API PIN | |
(inch) | (mm) | |
3 7/8"~5 1/4" | 98~134 | 2 3/8", 2 7/8" |
5 5/8"~6 3/4" | 143~171 | 3 1/2" |
7 1/2"~9 1/2" | 190.5~241 | 4 1/2" |
9 5/8"~13 3/4" | 245~350 | 6 5/8" |
14 5/8"~26" | 371~660.4 | 7 5/8" |