Particle Board Knife Ring Flaker Machine

0.7~14 Tons Per Hour Flakes Making Knife-Ring Flaker for Paticle Board Production Line

Description

The knife-ring flaker machine is one of the main machines in the preparation section of particle board production.

After the chipper cuts wood chips, bamboo chips, broken veneer, etc. into certain specifications of flakes, the knife-ring flaker makes them into flakes with certain thickness that meet the process requirements, which are used as raw materials for particle board. The flaker has formed a series of products with various specifications of knife ring diameters from 800 to 1600, which can meet the needs of particleboard production lines with an annual output of 30,000-450,000 m³.

The new Knife ring flaker is equipped with an increased amount of knives and thereby meets the market demands for higher capacities at a constantly good flake quality at lower energy consumption.

The knife ring, counter-rotating to the impeller, is driven by a gear motor via chain drives. This well-proven counter-rotating principle of the PALLMANN flakers ensures that, throughout the entire service life of the machine, all knives at the circumference of the knife ring cut evenly and that the flake material is reliably discharged. The rotating impeller accelerates the wood chips and pushes them through the interior of the knife ring where they are flaked by the knives which are arranged therein.

Structure of knife-ring flaker

1 Multi-stage structure for heavy object separator which will seperate wood chips with lenth of 60~120mm.

2 The adjustment device for wind to make the suspension wind speed the same.

3 Distribute wood chips uniform across the width of the knife ring.

4 Effectively control the protruding amount of the flying knife and the gap between the knife door to ensure uniform thickness of flakes.

5 New type of impeller to lower the enger consumption.

Main technical data