|
[China]
Trade Verify
Address: Shawa Industrial Area, Hejian City, Cangzhou City, Hebei Province, China
Contact name:
Hejian BaoHong Electrical Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Sun / Planetary Stranding Machine , Cable Laying Equipment Back Twist
1. Usage
The machine is used for stranding Cu, Al wire, ACSR and insulated
wires with back-twist,it also can steel-armoring or Cu-screening
cables.
2. Main Characters
The key gearboxes adopt the best gearboxes in China,the gearbox is
almost no noise.
The host body is back-twisting stranding. Supporting wheels support
the host body. Bobbin cage adopts end shaft clamping device, which
equipped with safety locking device. The wire tension adopts
friction tension. The machine is equipped with six stage gear-box
with positive inversion, pneumatic brake device, the whole welding
chassis. The bobbin cage is welded.
630 half cut type steel tape armoring machine is optional. This
armoring head is with six stage gear box, oil pump lubrication. It
can run forward, reverse and neutral. This machine is applicable to
maximum diameter 630mm steel tape. Mechanical friction tension is
adjustable. Angle of steel tape can be adjustment by the worm gear.
This machine is applicable for different steel tape armoring.
Mechanical friction belt or friction disc controls the wire pay-off
tension. This kind of wire tension is manually adjusted type. And
the friction is stable from full bobbin to empty bobbin.
Magnetic hysteresis controls the wire pay-off tension. This kind
can be controlled by PLC, and a series of data for the pay-off
tension is set in the PLC. The wire tension is more stable, from
full bobbin to empty bobbin. The tension adopts analog quantity or
real-time feedback type. This is a kind of passive pay-off tension
system.
The motor and small gearbox control the pay-off bobbin by
synchronous belt. The wire tension is changed according to
real-time wire tension feedback system. This is a kind of active
pay-off tension system. The wire tension is from 0 to a maximum
data. This kind of machine is usually used for making OPGW cable
and other cable which needs precise wire tension.
3. Configuration
Pay-off, mainframes of 6-reel section, 12-reelbsection, 18-reel,
24-reel and 30-reel, die holder, tape lapper, armor unit, haul-off,
take-off, driven system and electrical system.
4.Technical parameters
| Model (Planetary Stranding Machine) | JLY-315 | JLY-400 | JLY-500 | JLY-630 | |
| Diameter of single wire | Copper | φ1-1.6 mm | φ1-4 mm | φ1.2-5 mm | φ1.5-5 mm |
| Aluminum | φ1.2-2 mm | φ1.2-4 mm | φ1.4-5 mm | φ2.0-5 mm | |
| Maximum stranded conductor OD | φ14 mm | φ28 mm | φ35 mm | φ45 mm | |
| Stranding Pitch | 6 Bobbin Stranding Cage | 26-435 | 39-695 | 44-770 | 48-840 |
| 12 Bobbin Stranding Cage | 30-526 | 43-774 | 47-858 | 50-928 | |
| 18 Bobbin Stranding Cage | 34-639 | 47-858 | 55-1001 | 65-1201 | |
| 24 Bobbin Stranding Cage | 38-749 | 51-940 | 63-1151 | 75-1601 | |
| Rotating Speed | 6 Bobbin Stranding Cage | 218 r/min | 120 r/min | 106 r/min | 55 r/min |
| 12 Bobbin Stranding Cage | 118 r/min | 110 r/min | 97.5 r/min | 45 r/min | |
| 18 Bobbin Stranding Cage | 108 r/min | 100 r/min | 82.9 r/min | 35 r/min | |
| 24 Bobbin Stranding Cage | 98 r/min | 90 r/min | 74 r/min | 25 r/min | |
| Capstan | Capstan Wheel Diameter | 1000 mm | 1600 mm | 1800 mm | 2000 mm |
| Maximum Haul-off Force | 2T | 5T | 10T | 15T | |
| Motor Power | 18.5 KW | 22 KW | 37 KW | 55 KW | |
| Bobbin Size | 315 mm | 400 mm | 500 mm | 630 mm | |
| Center Payoff Bobbin | 315 mm | 1250 mm | 1600 mm | 1600 mm | |
| Take-up Bobbin | 1250 mm | 2000 mm | 2000 mm | 2500 mm | |
| Maximum Haul-off Linear Speed | 25 m/min | 30 m/min | 34.7 m/min | 20 m/min | |
| Central Height | 1000 mm | 1000 mm | 1000 mm | 1100 mm | |
5. Photo
6. Packing photo
7. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual
output value is over 10 million dollars at present,and has
developed into one of the most important Stranding Machine
Manufacturer in China.
8. FAQ
− Q: What can we offer our customers?
A: Our professional production and technical personnel can train our customers' employees and ensure the smooth production of customers. And will provide our customers with after-sales service.
− Q: How long is the machine warranty?
A: Warranty period of one year (since the completion of mechanical debugging at the buyer's factory)
− Q: Why do I choose your company?
A: We have more than 15 years of professional experience in the
production of cable machinery, providing high-quality,high-security
products.
We have an experienced team of skilled workers and engineers.
We can support overseas training engineers.
We can customize the design, to accept the customer's sample
design.
We can provide customers with after-sales service.
