Standard Head 5FT Spring Cone Crusher Tertiary Crushing Machine 37.8t Weight

Standard Head 5FT Spring Cone Crusher Tertiary Crushing Machine 37.8t Weight

Symons Standard Head 5FT Spring Cone Crusher WL1500 Specifications:

1. Category: Stone Crusher

2. Model: WL1500

3. Cavity: Coarse

4. Rotation Speed: 560RPM

5. Power: 185-220KW

6. CSS: 19-64mm

7. Throughput: 265-580t/h

Stone Crusher for Hard Rock Tertiary Crushing Machine Operating Mechanism:

The spring cone is mainly composed of a frame, a transmission, an eccentric shaft, a bowl-shaped bearing, a crushing cone, an adjusting device, an adjusting sleeve, a spring, and a hydraulic station for adjusting the discharge port. When the crusher is working, the motor drives the eccentric bushing to rotate through the horizontal shaft and a pair of bevel gears. The crushing cone axis line is swiveled under the eccentric bushing, so that the broken wall surface is close to and then leaves the rolling wall. The surface is such that the ore is continuously crushed and bent in the crushing chamber to be broken.

Symons Compound Spring Hydraulic Stone Cone Crusher Benefits:

● Spring-loaded protection

● Has a complete lubrication system that automatically shuts off when the temperature is too high or the flow rate is too slow

● The internal structure has good sealing performance and can effectively protect the equipment from dust and other small particles

● Long service life and strong applicability

Maintenance Instructions on Composite Stone Cone Crushing Equipment:

a. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required lubricating oil must be cleaned, the seal must be good, and the main oil filling of the machine. (1) Rotating bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.

b. Newly installed tires are prone to loosening and must be inspected frequently

c. Pay attention to whether the work of all parts of the machine is normal

d. Pay attention to the wear level of the wear parts and pay attention to the replacement of the worn parts

e. When the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it

White Lai Stone Cone Crusher Pictures: