|
[China]
Trade Verify
Contact name:
Beijing Silk Road Enterprise Management Services Co.,LTD |
|
Verified Suppliers
|
|
|
RS1A THRU RS1M SURFACE MOUNT Reverse Voltage - 50 to 1000 Volts Forward Current -1.0 Ampere
| The plastic package carries Underwriters Laboratory |
| Flammability Classification 94V-0 |
| For surface mounted applications Low reverse leakage |
| Built-in strain relief,ideal for automated placement |
| High forward surge current capability |
| High temperature soldering guaranteed: |
| 250 C/10 seconds at terminals |
| Glass passivated chip junction |
MECHANICAL DATA
Case : JEDEC DO-214AC molded plastic body over passivated chip Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 |
Polarity : Color band denotes cathode end Mounting Position : Any |
| Weight :0.002 ounce, 0.07 grams |
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. | |||||||||
| MDD Catalog Number | SYMBOLS | RS1A | RS1B | RS1D | RS1G | RS1J | RS1K | RS1M | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
Maximum average forward rectified current at TL=90 C | I(AV) | 1.0 | Amp | ||||||
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
30.0 |
Amps | ||||||
| Maximum instantaneous forward voltage at 1.0A | VF | 1.3 | Volts | ||||||
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C | IR | 5.0 50.0 | mA | ||||||
| Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | RqJA | 50.0 | C/W | ||||||
| Operating junction and storage temperature range | TJ,TSTG | -50 to +150 | C | ||||||
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES RS1A THRU RS1M
