Active Member
|
[China]
Address: Room 12-22, Chuangke Square, No. 88, Fuzhou South Road, Fu'an Street, Jiaozhou, Qingdao, China
Contact name:Lurlene Lu
Qingdao Powerup International Trade Co.,Ltd |
|
|
Hot-dip Galvanized Surface Treatment Monopole Tower With Q235B, Q345B Steel For Power Transmission
Our company is professional in supplying all kinds of monopole transmission tower. We have advanced production technology and production equipment for transmission line steel tower of 1000kV and below, 500kV substation architecture, 220kV power transmission and transformation steel pipe pole, telecommunication tower, and substation structure. We have set up 4 angle steel iron tower processing workshops, 2 steel pipe pole processing workshop, and 1 hot dip galvanizing processing workshop.
Monopole Transmission Tower is widely used in power transmission projects. The following is our production process: for 15 m High Mast Octagonal Steel Pole
Raw material test →Cutting →Molding or bending →Welding (longitudinal ) →Dimension verify →Flange welding →Hole drilling →Calibration →Deburr→Galvanization or powder coating, painting →Recalibration →Thread →Packages.
1. Products
Q235B, Q345B Transmission Monopole Tower With Hot-dip Galvanized Surface Treatment
2. Material
| Structure Steel | ||
| High Tensile Steel | Mild Steel | |
| Grade | GB1591: Q345B, Q345C,Q3455D | GB700: Q235B, Q235C,Q235D |
| EN10025: S355JR, S355J0, S355J2 | EN10025: S235JR, S235J0, S235J2 | |
| ASTM A572 Gr50 | ASTM A36 | |
| Tension strength (Mpa) | 470~630 Mpa | 360~510 Mpa |
| Yield strength (t≤16mm) (Mpa) | 355 Mpa | 235 Mpa |
| Elongation (%) | 20 | 24 |
3. Bolts&Nuts
| Grade | Grade 4.8, 6.8, 8.8 |
| Standards for mechanical properties | |
| Bolts | ISO 898-1 |
| Nuts | ISO 898-2 |
| Washers | ISO 6507-1 |
| Standards for Dimensions | |
| Bolts | DIN7990, DIN931, DIN933 |
| Nuts | ISO4032, ISO4034 |
| Washers | DIN7989, DIN127B, ISO7091 |
4. Marking
| Method of marking of the members | Hydraulic Press Stamping |
5. Welding
| Method | CO2 Shielded Arc Welding & Submerged Arc Welding(SAW) |
| Standard | AWS D1.1 |
6. Galvanizing
| Galvanization standard of steel sections | ISO 1461 or ASTM A123 |
| Galvanization standard of bolts and nuts | ISO 1461 or ASTM A153 |
7. Capacity
| Maximum Production Capacity of Steel Tower per annum | 100,000 TON per annum |
| Maximum Capacity of Galvanizing Plant per annum | 100,000 TON per annum |
8. Test
| Factory test | Tensile test,Elements analysis, Sharpy test(impact test), Cold Bending, Preece test, Hammer tes |
9. Quality control
100% inspection: Each member will be checked by our QC team to ensure all members are qualified before delivery.
10. Package
Set-wisely packing or member-wisely packing as per client's requirements.
Tower members: One steel tower is separated into several bundles.
Bolts: Packing material is robust nylon bag or steel drum.
11. Our Commitment and target
Four ZEROs---Zero Quality Defect, Zero Quantity Shortage, Zero Delivery Delay, Zero Client Complaint
The following are some of our photos for you to check:
1. Our Equipments:
2. Our produce process:
3. Our Galvanizing Pool:
4. Do Trial-assembly Before Batch Production:
5. Tubular Members after hot-dip galvanized:
6. Loading:
