Hydraulic Post Cutting Water Gutter Roll Forming Machine 8-12m/Min

K gutter rain or water gutter roll forming machine : uncoiler_main forming machine_hydraulic cutting system_runout table_control system

It’s a full automatic line. save labor and time.

The gutter is used in roof system to gather rain water, and then let rain go down .

The steel Rain Gutter Roll Forming Machine is used to produce the gutter sheets with the pre-painted steel coils ; and the steel roof tile that is produced by the gutter machine is widely used in village , hotel , exhibition , vocation vallage , family construction and outdoor decoration Specifications of k style gutter roll forming machine

1. Suitbale material: steel, Galvanized steel, pre-painted steel etc.

2. Material thickness: 0.25-0.8mm ( or 0.3-0.8mm, max to 1.5mm, just tell us your requirements)

3. Forming steps: 14-18 steps

4. Shaft: high grade 45#steel, forged, all solid

5. Rollers: GC15, quenched to 58-62 centi grade

6. Middle plate : thickness 16mm

7. Cutting system: Cr12Mov, quenched

8. Motor:5.5Kw+3, Brand: shanghai lichao/ Guomao

9. Control system: Panasonic/Delta PLC , TOUCH SCREEN ETC.

10. Power: 380V/50Hz/3Phase or as required

11. Forming speed: 12-15m/min

12. Driving method: single 1 inch chain.