Active Member
|
[China]
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
|
Galvanized Steel Floor Decking Roof Sheet Roll Forming Machine Line Equipment
1. Product profile:
The steel plate floor tile decking sheet roll forming machine is more and more requested from the customers.
As the manufacturer, we have rich experience to produce this machine and can provide some design concepts to match various demands.
2. Direction for use
Galvanized floor decking sheet roll forming machine:
1. Put all necessary parts on the right location,make the ground falttening.
2. Connect electric wires,use 6-8 mm² support line and keep grounding.
3. Fill hydraulic oil in the pump.not too full,three quarters are ok.
4. Feed raw materil into the machine slowly,make it run smoothly then automatic. 5.Pay attention to final sheet collection,do not scretch it or hurts people.
3. Main Features:
| Guarantee/Warranty | 2 years |
| Price | Lower price with higher quality |
| Machine Performance | Low break down rates, with long life |
| Prompt Delivery | Short delivery time |
| Quality | High quality get the approval of the customers |
| Service | Good after service to guarantee you use the machine normally and sell your products well |
4. Parameters:
| 1 | Length of the main part | 12500*1200*1400mm |
| 2 | Weight of main part | 9 T |
| 3 | Voltage | 380V-50HZ-3P (as customer’s request) |
| 4 | Roller fixer | Guide column |
| 5 | Frame | Middle plate welded |
| 6 | Frame thickness | 18mm |
| 7 | Drive mode | By chain |
| 8 | Material of rollers | Cr15 |
| 9 | Material of shafts | 45# steel with tempering |
| 10 | Diameter of shafts | φ90mm |
| 11 | Number of rollers | 28 rollers |
| 12 | Main power | 22kw (Cycloidal planetary gear speed reducer) |
5. Description of application effect
6.Company Information:
Cangzhou Best Machinery Manufacturing co., LTD is specialized in the manufacture of high-end equipment cold bending forming equipment manufacturer,has a professional engineer for technical guidance.Engineers engaged in cold bending mechanical equipment design for more than 20 years,has a wealth of design concept.Can provide users with a special type of design and manufacture.At the same time to sell equipment for installation,guidance,production,commissioning one-stop service.
