|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Color Coat Metal Glazied Roof Tile Roll Forming Machine 4m/min - 6m/min Speed
Our factory has been in roll forming machine feild about 20years, we have own design team, we produce different kind of roll tile machine, which is eary to operate. There is control box control length and quantity.We will send manual book or video to teach you how to use.
Working flow
Decoiler----feeding----roll forming----pressing----cut to
length----output table
Machine components
| No. | Name | Qty |
| 1. | De-coiler | 1 Set |
| 2. | Roll Forming Machine | 1 Set |
| 3. | Pressing Device | 1 Set |
| 4. | Hydraulic Cutting Device | 1 Set |
| 5. | PLC Control Box | 1 Set |
| 6. | Hydraulic Pump | 1 Set |
| 7. | Stacker | 1 Set |
Parameter
Auto Uncoiler
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand. Loading
capacity:5T
Inner diameter: 500-508mm
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
Hydraulic System and Computer Control Cabinet
Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use
PLC:EURA
Press Form
Material of blades: Cr12,quenching treatment
Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment
Auto Stacker
Start reducer quickly after finish cutting products, deliver products to hold arms by deliver rollers .then pneumatic control stack on the store table which is movable. Pneumatic pump (power sources) is self supply.
| Technical parameters: | |
| Material type | Pre-painted steel sheet |
| Material thickness (mm) | 0.3-0.7 mm |
| Material yield stress (Mpa) | 230~300 |
| Max. forming speed (m/min) | 4m/min |
| Roll material | high grade No.45 forged steel, Coating with hard chrome |
| Roller driven type | Chain transmission |
| Controller & operation | PLC& touch screen and button |
| Index error of length | ≤±2.5mm ( length≤ 5000mm) ; ≤±3mm ( 5000mm < length ≤ 10000mm) |
| Quantity of stands | at least 13 groups |
| Hydraulic system pressure (Mpa) | 12mpa |
| Hydraulic station motor power (KW) | 5.5kw |
| Voltage | at buyer's requirement |
| Total power (KW) | 8.5kw |
| Total weight (Kg) | About 5000kgs |
Photos
